Safety Precautions, General Operation, Slope Operation

Safety Precautions

Safe Operation Practices For Ride-On Mowers

Failure to observe the following safety instructions could result in serious injury or death. Your complete and unimpaired attention is required at all times. Purchaser must give these instructions to the people operating and maintaining this tractor.

General Operation

Read, understand, and follow all instructions in this owners manual, the engine manual, the attachment manual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire etc., which could be picked up and thrown by the mower or other attachment.

Be sure the area is clear of other people & pets before operating. Stop machine if anyone enters the area. The operator is responsible for the safety of bystanders.

Before starting place the PTO lever in “Off” position and the gear shift lever in the neutral “N” position.

Never carry passengers.

Operate only from operators position, on the seat.

Do not operate in reverse unless absolutely necessary. Always look down and behind before and while backing.

Be aware of the attachment discharge direction and do not point it at anyone. Do not operate without either the entire attachment or the guarding in place and functioning properly.

Slow down before turning to prevent tipping or loss of control.

Never leave a running machine unattended. Always turn off attachment, set parking brake, stop engine, move shift control to first gear position, and remove keys to prevent unauthorized use before dismounting.

Turn off power to attachment when not in use.

Disengage attachment clutch, stop engine, remove key and wait for moving parts to stop before leaving operators position for any reason such as removing, cleaning, servicing, or unclogging the attachment.

Operate only in daylight or good artificial light.

Do not operate the machine while under the influence of medication, alcohol or drugs. Safe operation of this equipment requires your complete and unimpaired attention at all times.

Watch for traffic when operating near or crossing

roadways or drives. Follow traffic laws when operating on or near a road.

Use extra care when loading or unloading the machine into a trailer or truck. When handling equipment connect the chassis to the transporting vehicle. Never connect from control levers, rods, or like items that could be damaged.

Use only attachments or accessories designed for your unit. See your Gravely Dealer.

Wear sturdy footwear. Do not operate tractor barefoot or when wearing open sandals or canvas shoes. Do not wear loose clothing that may get caught in rotating parts of unit. Wear hand, head, ear and eye protection.

Slope Operation

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope of it you feel uneasy on it, do not operate on it.

Operate up and down slopes, not across. Do not operate on steep slopes.

Remove obstacles such as rocks, tree limbs, etc. from the area of operation.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass or deep snow can hide obstacles.

Use slow speed. Choose a low ground speed so that you will not have to stop or shift while on the slope. Engage the directional control pedal slowly.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine. Use only approved hitch points.

Limit loads to those you can safely control.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage attachment power and proceed slowly straight down the slope. If you must stop when going up the slope and can not safely back down, disengage the PTO, release the direction control pedal, and depress the brake pedal. Then place the gear selector in low speed and slowly release the brake pedal, while slowly engaging the direction control pedal.

070 - Professional G, 071 - Professional G, 072 - Professional G specifications

Ariens has long been a recognized name in the outdoor power equipment industry, particularly in the realm of snow removal. Among its impressive lineup is the Professional G series, which includes the Ariens 070, 071, and 072 models. Designed for demanding commercial and residential applications, these machines are built for durability, efficiency, and ease of use.

The Ariens 070 Professional G features a powerful engine designed to tackle the toughest snow conditions. With its robust 420cc engine, this model is capable of producing substantial torque for efficient snow clearing. It includes a 24-inch clearing width and a 21-inch intake height, making it suitable for deep snowfall while allowing for quick and efficient passes. The heavy-duty construction of the 070 ensures that it can withstand rigorous use, maximizing its lifespan and reliability.

Moving on to the Ariens 071 Professional G, this model takes performance up a notch with a larger 24-inch clearing width. It also features a comprehensive 12-inch impeller that enhances the snow discharge distance, allowing users to throw snow further away from their clearing path. With increased handling capabilities, the 071’s enhanced friction disc drive system offers improved control and traction on slippery surfaces. This model is ideal for those who frequently encounter heavy or wet snow.

The Ariens 072 Professional G is the flagship of the series, boasting advanced features tailored for professional-grade performance. It is equipped with a 420cc engine and incorporates Ariens' patented Auto-Turn technology, which enables seamless maneuverability. This model also comes with premium functionalities such as an adjustable drift cutters and a remote chute rotation control, giving users the ability to direct snow discharge from the operator's station, maximizing control during operation.

All three models feature heavy-duty steel frames and reinforced impellers for increased durability and reduced wear over time. Ergonomic controls and adjustable handle heights make these models user-friendly, allowing operators to work efficiently without unnecessary strain. Moreover, these snow blowers feature larger tires for improved traction in all types of snow conditions, making them an excellent choice for winter maintenance tasks.

In summary, the Ariens 070, 071, and 072 Professional G models exemplify the brand's commitment to quality and performance. With their powerful engines, user-friendly designs, and advanced snow-clearing technologies, these snow blowers are primed to tackle everything from light dustings to heavy winter storms, meeting the needs of both professional landscapers and homeowners alike.