American Standard 2470.002, 2470.028W, 2470.128W instruction

STRATFORD™ 5-1/2'

WHIRLPOOL AND BATHING POOL

AMERICAST® BRAND ENGINEERED MATERIAL

STRATFORD 5-1/2' WHIRLPOOL AND BATHING POOL

❏2470.028W Whirlpool Featuring System I:

•Americast® brand engineered material

•Acid-resistant porcelain finish

•Integral lumbar support with beveled headrest

•Full slip-resistant coverage

•End drain outlet

•1.5 HP single speed, self-draining pump/motor

•Factory installed power cord and plug

•Six multi-directional and flow-adjustable jets

•Deck-mounted air switch On/Off

•Two silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

❏2470.128W Whirlpool Massage featuring System I with Grab Bar Drilling

•Same as 2470.028W except with grab bar drilling (grab bar must be ordered seperately)

❏2470.028WC StayClean™ Whirlpool Massage featuring System I

•Same as 2470.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

❏2470.128WC StayClean™ Whirlpool Massage featuring System I

•Same as 2470.128W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan® and grab bar drilling (grab bar must be ordered seperately)

❏2470.002 Bathing Pool

❏2470.102 Bathing Pool with Grab Bar Drilling

•Same as 2470.002 except with grab bar drilling (grab bar must be ordered seperately

Nominal Dimensions: 66" x 32" x 20" (1676 x 813 x 508mm)

Bathing Well Dimensions: 60" x 27" x 18" (1524 x 686 x 457mm)

Americast® brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite.

To Be Specified - Required:

❏Color:

❏Bath Filler: (specify finish)

❏Bath Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏Safe-T-Heater*: 9075.120

❏Jet Trim Ring Kit: 9860.200-one per kit (specify color) for Body Massage Jets only

❏Universal Tile Bead Kit: 751755-100

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

*NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ASME A112.19.4M for Americast Fixtures

•ASTM F-462 for Slip-resistant Bathing Facilities

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

NOTE: Roughing-in dimensions shown on reverse side of page.

BV-36

Rev. 4/05