American Standard 2775.002, 2775.018WC dimensions General Specifications for 2775 Whirlpool

CADET™ CORNER

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

1524mm(60)

165mm (6-1/2)

RECOMMENDED FITTING LOCATION

64 X 330mm (2-1/2 X 13)

	OUTLINE OF
	CUTOUT	C/L
	1080 mm
	(42-1/2)
	2159mm
		(85)
	C/L OF	76mm
		(3)
38 mm REF.	OVERFLOW
(1-1/2)
INTEGRAL
SUPPORT
FEET
ROUGH	1-1/2 N.P.T.M.
FLOOR	THREADS

1-1/2 O.D. TAILPIECE

1080mm	229 X 305mm
	(9 X 12)
(42-1/2)	CUTOUT IN
	FLOOR FOR
	DRAIN	1076mm
	SAFE-T-	(42-3/8)
	HEATER		1524mm
	REMOVABLE
	BLANK		(60)
70mm REF.	ON/OFF
(2-3/4)	SWITCH
		PROVIDE ACCESS
		TO PUMP FOR
		SERVICING ON ALL
	PUMP	INSTALLATIONS

279mm

(11)

C/L OF

DRAIN OUTLET

LEVELING STRINGER

NOT FOR SUPPORT

502mm

(19-3/4)

464mm

(18-1/4)

117mm

70mm (4-5/8) (2-3/4)

	1524mm(60)				229 X 305mm
					(9 X 12)	1076mm
					CUTOUT IN	(42-3/8)
					FLOOR
					FOR	1524mm
		165mm			DRAIN
							(60)
		(6-1/2)
				70mm REF.
				(2-3/4)
RECOMMENDED
FITTING LOCATION
64 X 330mm (2-1/2 X 13)
	OUTLINE OF			279mm
	CUTOUT		C/L
				(11)
	1080 mm			C/L OF
	(42-1/2)
				DRAIN OUTLET
		2159mm
		(85)
	C/L OF	76mm		LEVELING STRINGER
38 mm REF.		(3)		NOT FOR SUPPORT
	OVERFLOW
(1-1/2)
							502mm
INTEGRAL						464mm	(19-3/4)
						(18-1/4)
FEET
ROUGH	1-1/2 N.P.T.M.
FLOOR	THREADS				117mm
				70mm
1-1/2 O.D. TAILPIECE					(4-5/8)
				(2-3/4)

GENERAL SPECIFICATIONS FOR 2775 WHIRLPOOL

INSTALLED SIZE		85 X 60 X 19-3/4In.(2159 X 1524 X 502mm)
WEIGHT						130 Lbs. (59 Kg.)
WEIGHT w/WATER					756 Lbs. (343 Kg.)
GAL. TO OVERFLOW							75 Gal. (284 L.)
MIN. OPERATING GAL.							60 Gal. (227 L.)
BATHING WELL AT SUMP			32 X 32 In. (813 mm X 813 mm)
BATHING WELL AT RIM				46 X 46 In. (1168 X 1168mm)
WATER DEPTH TO OVERFLOW							14 In. (356 mm)
FLOOR LOADING			34 Lbs./Sq. Ft. (115 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.								41.7
CUBE	(FT3)							70.4

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP 2.1 HP, 14.4 AMPS, 120V.

NOTES:

GENERAL SPECIFICATIONS FOR 2775 BATHING POOL

INSTALLED SIZE				85 X 60 X 19-3/4In.
	(2159mm X 1524 mm X 502mm)
WEIGHT						105 Lbs. (48 Kg.)
WEIGHT w/WATER					730 Lbs. (328 Kg.)
GAL. TO OVERFLOW							75 Gal. (284 L.)
BATHING WELL AT SUMP		32 X 32 In. (813 mm X 813 mm)
BATHING WELL AT RIM			46 X 46 In. (1168 X 1168mm)
WATER DEPTH TO OVERFLOW							14 In. (356 mm)
FLOOR LOADING	33 Lbs./Sq. Ft. (111 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.								41.7
CUBE (FT3)								70.4

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 2 WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED SEPARATELY. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1/A112.19.7M.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

© 2003 American Standard Inc.