Care and Cleaning

Step 5. Disassemble union assembly with 4” long threaded nipple. Assemble brass flange nuts and flat rubber gasket onto threads of 4 long union nipple. Protect surface finish of union coupling or cover wrench jaws to prevent marring of finish on coupling and assemble coupling to the top of the supply riser. BE SURE TO USE TEFLON TAPE OR TEFLON PIPE SEALANT AT THIS CONNECTION.

Step 6. APPLY TEFLON TAPE OR TEFLON PIPE SEALANT to threads on union nipple. 4” long threaded union nipple. Insert 4” long threaded nipple up through hole in bath deck and assemble to union nut on top of supply riser. DO NOT OVERTIGHTEN. Tighten flange nuts and rubber gaskets to underside of bath. Clear silicone sealant may also be used to provided a watertight seal between the bath and the water supply connection.

Step 7. Adjust the base flange as necessary to acquire proper height for assembled supply riser. Shutoff valve stems should be aligned so that they are accessible. 1” of threads maximum should be protruding through the bath deck to accommodate the 6” deck mounted supply adapters. Drill 1/8" pilot holes through floor flange anchor holes, and secure each flange to floor with four #10 x 2" screws. Fully tighten under-floor nipple locknuts.

Step 8. Assemble the 6” deck mounted supply adapters to 4” union nipple aligning coupling nuts toward bath sump. Assemble bath filler per manufactures instructions.

Step 9. Remove shutoff valve handle lockscrews and assemble handle to stem. Replace handle lockscrews and handle lockscrew cover on handle. Step 10. Connect hot and cold water supplies to 1/2" inlets.

Step 11. When bath and drain installation is complete, open shutoff valves and bath filler Flush lines, check for leakage. Close bath filler valves. Repair leaks as required.

Please use the following care and cleaning procedures to ensure maximum enjoyment and use of your brass fixtures:

After every use, wipe fittings gently with a soft, damp cloth and dry thoroughly with a soft towel. It is important to dry base areas where he fixtures come in contact with wet surfaces.

Fixtures should be cleaned with mild, soapy water, rinsed thoroughly with clear water, and dried with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use acids, abrasive scouring powders, detergents, or chemicals on brass fixtures!

FOR AFTER-SALE SERVICE:

In the United States:

American Standard Inc.

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 442-1902

www.AmericanStandard-US.com

	In Canada:	In Mexico:
American Standard		Customer Service Manager
2480 Stanfield Rd.		Ideal Standard, S.A. de C.V.
Mississauga, Ontario		Via Morelos #330
Canada L4Y 1S2		Col. Santa Clara
Toll Free: (800) 387-0369		Ecatepec 55540 Edo. Mexico
Toll Free: (800) 387-0369		www.AmericanStandard.com.mx
www.AmericanStandard.ca		www.AmericanStandard.com.mx
www.AmericanStandard.ca

- 2 -	752870 - 100 Rev . A

2742.222, 2742.020 specifications

The American Standard 2742.222 and 2742.020 are two striking models from the prestigious brand known for its commitment to quality, innovation and style in bathroom fixtures. These models epitomize the intersection of functionality and aesthetic appeal, making them popular choices for contemporary bathrooms.

Both models feature a sleek and modern design that effortlessly blends into various home styles, from minimalist to more traditional spaces. The clean lines and elegant shapes enhance the overall look of the bathroom while providing practical benefits. The American Standard brand is recognized for its attention to detail, and these models maintain that reputation with stylish finishes that are not only pleasing to the eye but also easy to maintain.

One of the standout features of the 2742.222 and 2742.020 is their durable construction. Made from high-quality materials, they offer long-lasting performance, ensuring that homeowners can enjoy their investment for years to come. The ceramic construction is particularly noteworthy, as it resists staining and scratches, helping to maintain a pristine appearance with minimal effort.

These models are designed with water efficiency in mind, contributing to lower utility bills while being environmentally responsible. They comply with WaterSense standards, utilizing advanced technologies to optimize water flow without sacrificing performance. This means that homeowners can enjoy a powerful and effective bathing experience while conserving water.

In addition to their performance features, the 2742.222 and 2742.020 prioritize user comfort. The ergonomic design promotes a comfortable bathing experience, and the well-placed fixtures make them easy to use for individuals of all ages. The spacious interior provides ample room to relax, making these models a great choice for those looking to create a spa-like atmosphere at home.

Installation is straightforward, which adds to the convenience of these models. Whether in a new build or a renovation, the compatibility with standard plumbing fixtures ensures that upgrading to these tubs is a hassle-free process.

In conclusion, the American Standard 2742.222 and 2742.020 are exceptional choices for those seeking quality, style and practicality in their bathroom fixtures. With their contemporary design, durability, water efficiency, and user-friendly features, they exemplify what modern bathrooms demand today.