American Standard 6060E SERIES guide

WHIRLPOOL ELECTRICAL INSTALLATION INSTRUCTIONS

All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other applicable codes.

WARNING:

When using electrical products, basic precautions should always be observed, including the following:

1.DANGER: RISK OF ELECTRIC SHOCK

Connect only to a circuit protected by a ground-fault circuit interrupter.

2.Grounding is required. The unit should be installed by a licensed electrician and grounded.

3.Install to permit access for servicing.

4.All building materials and wiring should be routed away from the pump body and heater (if equipped).

The whirlpool should be installed on a 120 vac, 20 amp dedicated circuit. The circuit should be hard-wired from the electrical power supply panel. The circuit must be a three (3) wire circuit from the electrical supply panel. A grounded neutral wire and a third wire, earth ground, are essential.

E-Z INSTALL WHIRLPOOL HEATER

ELECTRICAL INSTALLATION

INSTRUCTIONS

Install a separate 120VAC / 15AMP dedicated circuit with GFCI (Ground Fault Circuit Interrupter) protection. With a No. 8 solid copper wire, bond the heater to the homes electrical panel or approved local bonding point. A bonding lug has been provided on the heater.

At initial start-up with power ON, push the GFCI test button. The reset button should pop out. Push this button in to reset. If the GFCI fails to operate in this manner, there is a ground fault or malfunction, indicating the possibility of electrical shock. Turn off the power and do not use the bath until the source of the problem has been identified and corrected.

SEPARATE
15 AMP GFCI OUTLET	ELECTRICAL INSTALLATION
	ELECTRICAL INSTALLATION

120 VAC

WHITE

BLACK

PROVERHEAT
OTECTION
RESET	HEATER ON
RESET

E-Z
INSTALL	WHIRLPOOL
	HEATER

GND .

HEATER

1.Route two separate branch circuits (figure 1) to the junction box near the whirlpool. *Each branch circuit MUST BE GFCI PROTECTED.

2.Use copper conductors only.

3.Insure the heater and pump are properly GROUNDED and BONDED as required. Bonding connectors suitable for No. 8 AWG copper wire are located on both the pump and heater assemblies.

a.Using No. 8 AWG copper wire, bond each of these assemblies together to the homes electrical panel or approved local bonding point.

SEPARATE 20 AMP GFCI OUTLET		Fig. 1
	for2.1 H.P. PUMP	Fig. 1
	for2.1 H.P. PUMP

120 VAC

W H I T E		B L A C K
W H I T E		B L A C K

PUMP/MOTOR

GND .

ELECTRICAL DIAGRAM

READ AND FOLLOW ALL INSTRUCTIONS

752864-100 Rev. C

(4)

6060E SERIES specifications

The American Standard 6060E Series is a premium offering in the realm of bathroom fixtures, providing an ideal blend of functionality, comfort, and style. This series is designed with the modern consumer in mind, emphasizing both aesthetics and performance, making it a popular choice for homeowners and contractors alike.

One of the standout features of the 6060E Series is its spacious 60-inch by 60-inch dimensions, which offer ample room for a comfortable bathing experience. The rectangular shape enhances the bathroom's overall appearance and makes it an attractive focal point. The tub is crafted from high-quality acrylic, which not only gives it a sleek finish but also ensures durability and ease of maintenance.

A key technology incorporated into the 6060E Series is the proprietary EverClean surface. This innovative feature resists the growth of stain and odor-causing bacteria, mold, and mildew, providing a cleaner and healthier bathing environment. As a result, homeowners can enjoy their baths with peace of mind, knowing that their tub will stay fresher for longer.

Another characteristic that sets this series apart is its slip-resistant bottom, enhancing safety during use. This is particularly important for families with children or the elderly, as it reduces the risk of slips and falls in the bathroom. The tub's design also includes an integral lumbar support, ensuring maximum comfort while reclining.

The 6060E Series is designed with easy installation in mind, featuring a lightweight structure that simplifies the setup process. It’s compatible with a range of deck-mounted faucets, allowing for customization to match personal styles and preferences. Additionally, the bathtub includes a pre-leveled bottom, ensuring a hassle-free installation.

This bathtub series is available in various color options, allowing consumers to select the perfect match for their bathroom décor. The clean lines and contemporary design elements make it suitable for a wide array of design styles, from modern to traditional.

In summary, the American Standard 6060E Series combines space, comfort, advanced technology, and elegant design to offer an unparalleled bathing experience. Its features make it a standout choice for anyone looking to upgrade their bathroom with a stylish and functional bathtub.