American Standard 7236E Series specification

INSTALLATION AND FRAMING INSTRUCTIONS

The variety of installations possible for this whirlpool may require framing procedures other than those shown. Locate studs as required. Ensure roughing-in dimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the pump and controls. It is strongly recommended that an additional opening be provided for access to the drain components.

NOTE: The apron should not be used as the primary access opening.

1.Position the whirlpool into the installation opening and level the deck, shimming the integral support feet as necessary. Mark the final position of the underside of the deck by tracing a line on to the studs (see Figure 1).

2.Remove the whirlpool and attach a 2 x 4 stringer to the studs, with the top of the stringer touching the traced line.

3.Install drain components to the whirlpool following the manufacturers instructions. Before replacing your whirlpool for final installation, be certain that an opening has been provided in the sub-floor for the drain. See the roughing-in drawing for suggested opening size and location dimensions.

4.Replace whirlpool and re-shim the integral support feet, shimming the entire length of the support feet. Secure the shims using construction adhesive, silicone, mortar or equivalent materials. While not a necessity, the use of a foundation base consisting of cement (e.g. Sakrete), mortar, or grout will help provide a solid and secure installation.

FIG. 1

19-1/4

(489mm)

TILE

BEAD

STRIP

TILE

WALLBOARD

SEALANT

BATH

ADHESIVE

LEVELING

STRINGER

NOTE: Tile bead kit not included and must be purchased separately.

TYPICAL RECESS INSTALLATION

TYPICAL PIER TYPE INSTALLATION

AS DESIRED

34-1/2

(876 mm)

CUTOUT

19-1/4

(489mm)

70-1/2

(1791 mm)

CUTOUT

19-1/4
(489mm)		4			m)
(489mm)		3			m)
		4		m
		4			6		)
		6			6		)
	8				3		m
	(						m
			(		4	m
			(		4	WIDTH
					1
				9
72-1/8			TUB
(1832 mm)				LEVELING
				STRINGERS

TILE

TILE BEAD

STRIP

SEALANT

BATH

(305 mm)

(610 mm)

AS DESIRED

MOUNTING SURFACE

WATERPROOF

SEALANT

(305 mm)

(610 mm)

ACCESS PANEL

ADHESIVE

LEVELING	UNLESS AN ACCESS OPENING OF AT LEAST
STRINGER	12" X 24" (305 X 610MM) IS PROVIDED,
	12" X 24" (305 X 610MM) IS PROVIDED,
	WARRANTY SERVICE WILL NOT BE PERFORMED.

BATH

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

752869-100 Rev. D

(2) SPIC AND SPAN® IS A REGISTERED TRADEMARK OF PROCTER & GAMBLE

7236E Series specifications

The American Standard 7236E Series represents a pinnacle in bathroom innovation, blending style and functionality to enhance modern bathing experiences. This innovative series is designed with the user in mind, focusing on comfort, efficiency, and aesthetics.

One of the standout features of the 7236E Series is its spacious, luxurious design, providing ample room for relaxation. The oversized bathtub is shaped to support the body, featuring a sleek and ergonomic profile that promotes an enjoyable soaking experience. The 7236E Series is available in multiple sizes, ensuring it fits comfortably in a range of bathroom layouts.

The series incorporates cutting-edge technologies that set it apart from competitors. American Standard has integrated their proprietary EverClean surface into the design, which inhibits the growth of stain and odor-causing bacteria, mold, and mildew. This formula ensures that the tub remains cleaner for longer, reducing maintenance efforts and enhancing hygiene.

Another remarkable technology utilized in the 7236E Series is the Whirlpool system. The strategically placed jets provide a soothing massage while helping to alleviate tension and improve circulation. Users can customize their experience by adjusting the intensity and flow of the water, ensuring the perfect retreat from daily stresses.

Additionally, the 7236E Series prioritizes water efficiency. Its design is optimized to use less water without compromising performance. The American Standard team has focused on creating a balance between luxury and sustainability, making it an excellent choice for environmentally conscious consumers.

The aesthetic versatility of the 7236E Series is notable; it is available in a variety of finishes to suit different décor styles. Whether you prefer a contemporary look or a classic appeal, this series can seamlessly integrate into your bathroom design.

Durability is another hallmark of the 7236E Series. Crafted from high-quality materials, this bathtub is built to withstand daily use while maintaining its structural integrity and finish for years to come.

In summary, the American Standard 7236E Series showcases a perfect blend of comfort, advanced technology, and artistic design. With its user-friendly features and luxurious amenities, it elevates the bathing experience to a new level, making it an excellent investment for any modern home.