Remote Control Description

See Figure 2 on page 6

Power, transport, and display features are described in the illustration legend on page 7. All remote features can also be activated via the buttons on the front panel. Descriptions of special operational fea- tures are outlined on pages 8-10.

Battery

Installation

and Removal

Notes

Further information on battery installation

The SACD Standard remote control uses one CR2025 lithium bat- tery, which is included with the shipment.

To open the battery compartment on the back of the remote control:

1.Place the remote face down on the table.

2.Use your thumbnail or a small jeweler’s or eyeglass screwdriver to move the small tab toward the center of the remote, while using your index fingernail or screwdriver to pull down gently on the slot to the right of the tab. The battery compartment will slide out.

3.Place the battery, plus side up, in the battery tray.

4.Slide battery compartment back into the remote until you hear a click.

The remote control is ready for operation.

Do not use a knife or other sharp objects to open the battery compartment; they will scratch the remote control finish.

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not used for a long period of time. Battery leakage can damage the remote control.

Krell SACD Standard