Operating the SACD Standard
| This section provides information about operating the SACD |
|
|
|
|
| Standard. See Front Panel /Remote Control Description, on pages |
|
|
|
|
Power On |
|
|
Press the back panel power switch (30) labeled “1”. When the SACD | ||
| Standard is initialized and in the | |
| LED (3) on the front panel illuminates. Then press the power button | |
| on the front panel or the SACD key (1) on the remote control, to | |
| place the SACD Standard in the operational mode. When the blue | |
| ||
| tional mode and ready to play a SACD or a conventional compact | |
| disc. |
How to Play a Disc
Playing the Conventional CD Layer of a Hybrid SACD
1.Press the open/close button or key (7) to open the disc transport.
2.Place the disc on the transport.
3.Press the open/close button or key again to close the disc trans- port. Track 1 begins to play, and the front panel display shows the elapsed track time. The
4.Press the SACD/CD button or key (10) to select another disc format and view available tracks.
5.Adjust the volume level through your system volume control.
6.Press the stop button or key (5) to end disc playback.
7.Press the play button or key (6) to begin playback again, from the first track.
8.To return the SACD Standard to the
If you are playing a
1.Press the stop button on the front panel (5) or the stop key (5) on the remote control. The front panel display reads STOP.
2.Press the SACD/CD button or key (10) twice. The red LED next to the CD label (22) appears in the front panel display and the con- ventional CD layer begins playing in approximately 30 seconds.
16 | Krell SACD Standard |