Medium Scratch

SCRATCH REMOVAL INSTRUCTIONS

1.For effective scratch removal and polishing, you will need to purchase these items:

1 sheet 1000 grit 3M® wet-dry sandpaper 1 sheet 1500 grit 3M® wet-dry sandpaper 1 sheet 2000 grit 3M® wet-dry sandpaper

1 small container of 3M® rubbing compound #05933

These items can be purchased at most auto supply stores that provide supplies to professional paint and body shops. Call before you go.

Not all auto supply stores will have these items.

2.Start sanding with 2000 grit paper. Use small squares of paper about 2" x 2" for all sanding and use lots of water. The water serves as both a lubricant and to prevent residue buildup on the paper. Residue buildup shortens the effective life of the paper and may scratch the surface you are trying to polish.

3.2000 grit paper is the finest grit available (the higher the number, the finer the grit). If you can’t remove all of the scratches with 2000 grit, switch to 1500 grit. Remember to wash the paper frequently with water as you sand.

4.If all of the scratches cannot be removed with 1500 grit, switch to 1000 grit. This should remove most fine scratches. If you have deep scratches or a gouge, coarser paper may have to be used (see chart to right). Be careful! Using grit that is too coarse may actually put in more scratches than it removes.

5.Once you have removed all of the scratches by sanding the finest paper possible, repeat the sanding process using successively finer grits of paper until you have once again sanded with 2000 grit.

6.Now use 3M® rubbing compound #05933 on a soft, damp cloth. Polish using considerable pressure to produce a smooth, shiny finish.

SUPERFICIAL

SCRATCH

2000 grit

LIGHT SCRATCH

1500 - 2000 grit

1000 - 2000 grit

DEEP GOUGE 600 - 2000 grit

SCRATCH / SANDPAPER GUIDE

AS AMERICA, INC. (“AMERICAN STANDARD”) LIMITED WARRANTY FOR ACRYLUX PRODUCTS

AS America, Inc. (“American Standard”) warrants to the original consumer purchaser that it will, at its option, repair or replace any of its plumbing products found by it to be defective under normal use and maintenance within the following periods from date of purchase: Electronic Components - two (2) years; Pump Motors - three (3) years; Fittings and Plumbing - two (2) years; Shell - ten (10) years residential; three (3) years commercial. In the event of a limited warranty claim proof of purchase will be required—save sales receipt.

This limited warranty DOES NOT COVER the following:

1.Defects or damage arising from shipping, installation, alterations, accidents, abuse, misuse, lack of proper maintenance and use of other than genuine American Standard replacement parts, in all cases whether caused by a plumbing contractor, service company, the owner or any other person.

2.Deterioration through normal wear and tear.

3.Expense of normal maintenance - periodic replacement of washers, seals, etc. is a normal maintenance requirement.

4.IN NO EVENT WILL AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED TO, TILES, MARBLE ETC.

5.Postage or shipping costs for returning products for repairs or replacement under this limited warranty and labor or other costs incurred in connection with product removal or installation under this limited warranty.

6.ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, ALL OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR THE EXTENSION BEYOND THE DURATION OF THIS LIMITED WARRANTY OF ANY IMPLIED LIMITED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR AN INTENDED PURPOSE. (Some jurisdictions do not allow limitations on how long an implied limited warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you.)

7.Responsibility for compliance with local code requirement. (Since code requirements vary greatly, distributors, dealers, installation contractor and users of plumbing products should determine whether there are any code restrictions on the installation or use of a specific product.)

8.If a whirlpool unit is purchased by a dealer and used as a demonstration unit the limited warranty takes effect as soon as the dealer uses the product as a demo. If this demonstration unit is subsequently sold to a customer, the dealer may transfer the remaining period of the limited warranty to the buyer only with American Standard written approval.

This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this limited warranty does not affect such statutory rights.

By Mail: American Standard Inc.	By Telephone:
P.O. Box 659	1-800-442-1902
West Caldwell, N.J. 07007
Attention: Customer Care Center

-4-	754286-100 Rev. A

3838Y1.CWT.XXX, 3636Y1.SW.XXX, 4834Y1.SW.XXX, 6032Y1.SW.XXX, 3232Y1.SW.XXX specifications

The American Standard collection of bathtubs, including the models 4834Y1.SW.XXX, 3636Y1.SW.XXX, 3838Y1.CWT.XXX, 6032Y1.SW.XXX, and 3232Y1.SW.XXX, showcases a commitment to quality and innovation in bathroom design. Each model is designed with a focus on comfort, functionality, and aesthetic appeal, catering to a variety of needs and preferences.

One of the standout features of these bathtubs is their ergonomic design. American Standard engineers ensure each model provides an optimal bathing experience, with contoured shapes that cradle the body and promote relaxation. This thoughtful design helps to alleviate stress and provides a luxurious bathing experience, making them a perfect fit for modern bathrooms.

These bathtubs are constructed using high-quality acrylic that offers durability and a smooth, glossy finish. The acrylic material not only enhances the aesthetic appeal of the bathtubs but also ensures they are resistant to chipping, cracking, and fading, thereby maintaining their pristine condition for years. This resilience makes them an ideal choice for busy households.

American Standard bathtubs also come equipped with advanced technologies aimed at enhancing user experience. Some models feature an anti-slip surface, ensuring safe entry and exit, especially for children or the elderly. This safety feature is complemented by deep soaking designs that allow users to immerse themselves in comfort.

Another notable characteristic is the easy installation process. Many of these bathtubs are designed for straightforward drop-in or alcove installations, minimizing the hassle and time required for set up. This user-friendly approach extends to maintenance as well, with surfaces that are easy to clean and maintain.

In terms of aesthetic, these models offer various sizes and shapes, making it easy to find the perfect fit for any bathroom layout. The clean lines and minimalist design allow for seamless integration into different décor styles, from contemporary to traditional.

Additionally, these bathtubs are frequently equipped with optional features such as whirlpool jets or integrated lighting systems, enhancing relaxation and creating a spa-like atmosphere at home.

In summary, the American Standard 4834Y1.SW.XXX, 3636Y1.SW.XXX, 3838Y1.CWT.XXX, 6032Y1.SW.XXX, and 3232Y1.SW.XXX models exemplify excellence in bathtub design. Their focus on ergonomic comfort, high-quality materials, innovative safety features, and aesthetic versatility make them stand out choices for modern bathrooms.