Installing Shower Wall in Alcove | American Standard 3636Y1.SW.XXX

INSTALLATION INSTRUCTIONS (continued)

STEP 4. INSTALLING SHOWER WALL IN ALCOVE

•Apply a generous bead of adhesive below mark on each back wall stud only (follow adhesive manufacturer’s recommended instructions).

•Position back panel in place and press firmly against studs to assure full contact with adhesive.

•Apply adhesive to studs for side panel opposite the shower controls.

•Push side panel firmly into place.

•Apply adhesive to each stud for faucet side panel and push side panel firmly into place. (Fig. 6)

•Reposition shims as needed.

•Align the front of the side walls and the front of the shower base.

•With walls properly positioned and shimmed, screw front flanges of side panels

to studs.

•Screw top flange of side panels to studs.

•Screw back panel flange to studs.

•After installation is complete, press panels against each stud to assure full contact with the adhesive. This will prevent the wall from “oil canning” and helps deaden the sound in finished alcove.

STEP 5. CAULKING

•When installed on an American Standard Shower Base, your American Standard Shower Wall is designed to function properly without being caulked. However, if you prefer the appearance of caulked joints, all seams must be caulked.

•Caulk must be applied around holes for the faucet, diverter valve and shower head.

•If your American Standard Shower Walls are used on a shower base other than an American Standard base, it will be necessary to caulk all seams.

•If a shower door is installed, it will require caulking between the base, the walls and the door.

•When caulking is required, always use a good grade silicone caulk for best results.

STEP 6. FINISHING

DRYWALL

•Using lattice strips or 1/4" luan, shim studs so that drywall will overlap nail flange smoothly. (If your wall extends past the shown alcove, it may be necessary to shim these studs.) (Fig. 7)

•Install 1/2" drywall on sides of alcove first then the back.

TILE

•Install 1/2" drywall up to (not over) wall nail flanges.

•Tile may now be installed over drywall up to the wall.

CLEANING

•Do not use any abrasive cleaners or metal scrapers.

•If drywall mud or plaster gets on your shower, it may be carefully removed with a wooden scraper made from a piece of scrap wood.

•Adhesive may be removed with mineral spirits.

•Ideal cleaners are Soft Scrub Gel® or Comet Gel®.

MARK TOP OF STUD

CENTER ASSEMBLED

WALL ON SHOWER

FIGURE 5. Mark studs.

FIGURE 6. Apply adhesive.

FIGURE 7. Shim studs.

WARNING: Some cleaning products are not suitable for use. Read all labels carefully.

DO NOT USE if they say “not suitable for use with ABS, acrylic or polystyrene”.

-3-	754286-100 Rev. A

3838Y1.CWT.XXX, 3636Y1.SW.XXX, 4834Y1.SW.XXX, 6032Y1.SW.XXX, 3232Y1.SW.XXX specifications

The American Standard collection of bathtubs, including the models 4834Y1.SW.XXX, 3636Y1.SW.XXX, 3838Y1.CWT.XXX, 6032Y1.SW.XXX, and 3232Y1.SW.XXX, showcases a commitment to quality and innovation in bathroom design. Each model is designed with a focus on comfort, functionality, and aesthetic appeal, catering to a variety of needs and preferences.

One of the standout features of these bathtubs is their ergonomic design. American Standard engineers ensure each model provides an optimal bathing experience, with contoured shapes that cradle the body and promote relaxation. This thoughtful design helps to alleviate stress and provides a luxurious bathing experience, making them a perfect fit for modern bathrooms.

These bathtubs are constructed using high-quality acrylic that offers durability and a smooth, glossy finish. The acrylic material not only enhances the aesthetic appeal of the bathtubs but also ensures they are resistant to chipping, cracking, and fading, thereby maintaining their pristine condition for years. This resilience makes them an ideal choice for busy households.

American Standard bathtubs also come equipped with advanced technologies aimed at enhancing user experience. Some models feature an anti-slip surface, ensuring safe entry and exit, especially for children or the elderly. This safety feature is complemented by deep soaking designs that allow users to immerse themselves in comfort.

Another notable characteristic is the easy installation process. Many of these bathtubs are designed for straightforward drop-in or alcove installations, minimizing the hassle and time required for set up. This user-friendly approach extends to maintenance as well, with surfaces that are easy to clean and maintain.

In terms of aesthetic, these models offer various sizes and shapes, making it easy to find the perfect fit for any bathroom layout. The clean lines and minimalist design allow for seamless integration into different décor styles, from contemporary to traditional.

Additionally, these bathtubs are frequently equipped with optional features such as whirlpool jets or integrated lighting systems, enhancing relaxation and creating a spa-like atmosphere at home.

In summary, the American Standard 4834Y1.SW.XXX, 3636Y1.SW.XXX, 3838Y1.CWT.XXX, 6032Y1.SW.XXX, and 3232Y1.SW.XXX models exemplify excellence in bathtub design. Their focus on ergonomic comfort, high-quality materials, innovative safety features, and aesthetic versatility make them stand out choices for modern bathrooms.