American Standard 3275 SERIES Test Installed Fitting, Prueba DE Ajuste Instalado, Service

Page 3

3 TEST INSTALLED FITTING

Turn HANDLES to OFF position.

Turn on water supplies and check for leaks.

Operate both HANDLES to flush water lines thoroughly and check TUB SPOUT for leaks.

Operate DIVERTER VALVE and check all SHOWER HEAD connections for leaks.

PRUEBA DE AJUSTE INSTALADO

Coloque las MANIJAS en la posición

CERRADA.

Abra el abastecimiento de agua y busque pérdidas.

Opere ambas MANIJAS para abrir completamente el abastecimiento de agua y busque pérdidas en el PICO DE LA TINA.

Opere la VÁLVULA DIVERSORA y controle que no haya pérdidas en todas las conexiones del CABEZAL DE LA DUCHA

VÉRIFIER LA TUYAUTERIE INSTALLÉE

Tourner les POIGNÉES à la position OFF (ARRÊT).

Ouvrir les conduits d’alimentation en eau et vérifier s’il y a des fuites.

Utiliser les deux POIGNÉES pour purger à fond les conduits d’alimentation en eau et vérifier si la BUSE DE REMPLISSAGE DE LA BAIGNOIRE présente des fuites.

Faire fonctionner l’INVERSEUR et vérifier s’il y a des fuites au niveau des connexions pour la POMME DE DOUCHE.

4 SERVICE

To change direction of handle rotation, proceed as follows:

ACRYLIC HANDLES

 

4

Turn VALVE to OFF position.

 

 

Pull out INDEX BUTTON (1) and remove HANDLE SCREW (2).

 

Pull HANDLE (3) off VALVE STEM (4) and turn 90˚ in a way that flat

 

in HANDLE (3) catches a the other FLAT on VALVE STEM (4).

 

Reinstall HANDLE SCREW (2) and INDEX BUTTON (1).

FLAT

If bath valve drips, operate handles several times from OFF to ON position.

Do not force-handles turn only 90˚.

 

7

 

 

LEVER HANDLES

 

 

Turn VALVE to OFF position.

 

3

 

2

Loosen HANDLE SCREW (5) .

 

Pull HANDLE (6) off ADAPTER (7). Loosen

ADAPTER

1

SCREW (8) and pull off ADAPTER (7).

 

 

 

Turn ADAPTER (7) 90˚ in a way that flat in ADAPTER (7)

8

catches a the other FLAT on VALVE STEM (4).

 

Reinstall ADAPTER SCREW (5) and LEVER HANDLE (6).

 

Tighten HANDLE SCREW (5).

5

 

SERVICIO

Para cambiar la dirección de la rotación6 de la manija, proceda como sigue:

MANIJAS ACRÍLICAS

Ponga la VÁLVULA en la posición CERRADA

Tire hacia afuera el BOTÓN INDICADOR (1) y retire el TORNILLO DE MANIJA (2).

Retire la MANIJA (3) del PIE DE LA VÁLVULA (4) y rótelo 90° de modo que la MANIJA (3) quede plana con el otro NIVEL en el PIE DE LA VÁLVULA (4).

Reinstale el TORNILLO DE MANIJA (2) y el BOTÓN INDICADOR (1).

Si la válvula de la tina gotea, gire las manijas varias veces de la posición CERRADA a la de ABIERTA. No fuerce las manijas-sólo gire 90° .

MANIJAS DE PALANCA

Coloque la VÁLVULA en posición CERRADA. Afloje el TORNILLO DE MANIJA (5).

Retire la MANIJA (6) del ADAPTADOR (7). Afloje el TORNILLO ADAPTADOR (8) y retire el ADAPTADOR (7).

Rote el ADAPTADOR (7) 90° de modo que quede plano en el ADAPTADOR (7) en el NIVEL del PIE DE LA VÁLVULA (4).

Reinstale el TORNILLO ADAPTADOR (5) y las MANIJAS DE PALANCA (6). Ajuste el TORNILLO DE LA CANILLA (5).

ENTRETIEN

Pour changer la direction de la rotation des poignées, procéder comme suit :

POIGNÉES EN ACRYLIQUE

Tourner la VALVE à la position OFF (ARRÊT).

Retirer le BOUTON INDICATEUR (1) et la VIS DE LA POIGNÉE (2).

Retirer la POIGNÉE (3) de la TIGE DE VALVE (4) et tourner de 90º de façon

à ce que le côté plat de la POIGNÉE (3) touche au côté plat de la TIGE DE VALVE (4). Replacer la VIS DE LA POIGNÉE (2) et le BOUTON INDICATEUR (1).

Si la valve du bain coule, actionner à plusieurs reprises les poignées (de la position OFF (ARRÊT) à la position ON (MARCHE)). Ne pas forcer les poignées, les tourner uniquement de 90º.

MANETTES À VOLANT

Tourner la VALVE à la position OFF (ARRÊT). Desserrer la VIS DE LA POIGNÉE (5).

Retirer la POIGNÉE (6) de l’ADAPTATEUR (7).

Desserrer la VIS DE L’ADAPTATEUR (8) et retirer l’ADAPTATEUR (7). Tourner l’ADAPTATEUR (7) de 90º de façon à ce que le côté plat de l’ADAPTATEUR (7) touche au côté plat de la TIGE DE VALVE (4).

Replacer la VIS DE L’ADAPTATEUR (5) et la MANETTE À VOLANT (6).

Serrer la VIS DE LA POIGNÉE (5).

M968252

Image 3
Contents Instructions Pour Lentretien TWO-HANDLE BATH/SHOWERCare Instructions Instrucciones DE Cuidado DEL ProductoTerminer L’INSTALLATION Finishing InstallationInstall Lever Handles Install Acrylic HandlesPrueba DE Ajuste Instalado Test Installed FittingVérifier LA Tuyauterie Installée ServiceAcrylic Handle Model Number Número DE Modelo Numéro DE Modèle Lever HandleManija DE Palanca Manette À Volant

3275 SERIES specifications

The American Standard 3275 Series represents a significant step forward in the world of bathroom fixtures, combining thoughtful design with advanced technology for optimal user experience. Renowned for their durability and efficiency, the 3275 Series is particularly popular among homeowners and remodelers looking for high-quality, stylish options for their bathrooms.

One of the standout features of the 3275 Series is its innovative design, which emphasizes both aesthetics and functionality. The sleek lines and modern contours not only enhance the visual appeal of any bathroom but also ensure that each piece fits seamlessly into various design themes, from contemporary to traditional. The range includes a variety of sink models, toilet options, and bathtub choices, allowing homeowners to create a cohesive look throughout their bathrooms.

In terms of water efficiency, the 3275 Series shines with its Eco-friendly technology. Many models are equipped with WaterSense certification, which means they use significantly less water without compromising performance. This is an essential feature for environmentally conscious consumers who want to reduce their water consumption while still enjoying the luxury of a beautifully designed bathroom.

Furthermore, the 3275 Series incorporates advanced flushing systems that enhance performance and prevent clogs, a common issue in traditional toilets. With features like the powerful siphon jet action, users can expect a clean and efficient flush every time, thus minimizing the need for frequent maintenance. The toilets in this series are also designed for easy installation, making them favorable for DIY enthusiasts.

Another key characteristic of the American Standard 3275 Series is its commitment to comfort. Many models feature ergonomic designs that provide a more comfortable experience, whether sitting on the toilet or using the sink. The addition of soft-close lids in toilets prevents slamming, contributing to a quieter bathroom environment.

Lastly, the 3275 Series is built with quality materials that resist scratching, chipping, and fading, ensuring long-lasting beauty and performance. With a warranty that reflects the brand's confidence in their product, consumers can trust that they are making a wise investment in their home.

In summary, the American Standard 3275 Series is a blend of modern design, water-saving technology, and user comfort. Whether renovating a bathroom or building a new one, this series offers a range of options that cater to both style and functionality, making it a top choice for consumers.