Lindy 70570 Software Installation, Package Contents, Windows 2000 installation, USB Interface

oWake-on-LAN and remote wake-up support

oMicrosoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload support

oSupports Full Duplex flow control (IEEE 802.3x)

oSupports IEEE 802.1Q VLAN tagging

o8K Transmit FIFO and 64K Receive FIFO support

oSupports power down/link down power saving

1.1.3. USB Interface

Provides three USB2.0 / USB1.1 ports (2 External + 1 Internal).

Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps).

Compliant with Open Host Controller Interface Specification for USB Rev 1.0a.

Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95, All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction.

1.2. Package Contents

Gigabit LAN + USB 2.0 PCI Host

This User’s Manual

Low Profile PCI Bracket

Driver CD

2. Software Installation

2.1. Windows 2000 installation

1.Power up the system, and insert the Driver CD into your CD-ROM/DVD. (Note: Do not install combo card before installing USB drivers in windows)

2.Browse the Driver CD, and points specify a location, example E:\USB2.0

Host\NEC\Win2K_XP\U2v2_1_4.exe

3.Double click on the “U2v2_1_4” icon, the USB 2.0 Driver V2.1.4 setup dialog

Will appear, when setup has finished, select “NO, I will restart my computer”. Click on “close” button to exit the wizard, and power off the system.

4.Insert Combo Card into an available PCI slot, and power up the system.

- 3 -