Linn IKEMI & GENKI Important safety information, Avis Risque DE Choc ELECTRIQUE. NE PAS Ouvrir

Page 3

Important safety information

Explanation of symbols used in this manual and on the product:

This symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure of sufficient magnitude to cause electric shock.

This symbol is intended to alert the user to the presence of important maintenance and servicing information in the instruction and service manuals.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE

COVER.

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: SHOCK HAZARD. DO NOT OPEN.

AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.

CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.

ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE.

DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.

ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

MAINS PLUGS

This appliance is supplied with a non-rewireable mains plug for the intended country.

Replacement mains leads can be obtained from your Linn retailer.

Should you need to change the plug please dispose of it carefully.

A plug with bared conductors is dangerous if engaged in a live socket.

The Brown wire must be connected to the Live (Line) supply pin. The Blue wire must be connected to the Neutral supply pin.

The Green/Yellow wire must be connected to the Earth (Ground) supply pin.

Please contact your retailer or a competent electrician if you are in any doubt.

i

Image 3
Contents P L AY E R O W N E R S M a N U a L Year 2000 Compliance Avis Risque DE Choc ELECTRIQUE. NE PAS Ouvrir Important safety informationGeneral Safety Instructions Iii CE Declaration of Conformity Contents Copyright and acknowledgements Introduction Page Page Page Hdcd Page Unpacking Setting up Ikemi and GenkiReplacing the fuses Locating the Ikemi and Genki for use with the handset Positioning the Ikemi and GenkiIkemi Connecting the Ikemi and GenkiMains supply Using the front panel Using the Ikemi & GenkiGenki display and controls Ikemi display and controlsClassik CD/CA Handset Standby Using the handsetIkemi and Genki operation Switching on and offDisplay Description Example Display informationPlaying a disc Press Skip forward Skip to the start of the next track Skip and SearchDirect track number selection 8481 Repeat Play00 = Programming a selection of tracks programme mode aProgramming excluding of tracks programme mode B Genki variable output Advanced CD functions Cd8? Option Description Values User OptionsMaintenance CD handlingServicing Technical support Technical information Ikemi SpecificationsGenki Specifications Pack