Linn IKEMI & GENKI owner manual

Page 14

6

Sync Link™.

The Sync Link is a simple system which we have used since we made our first CD player (the Karik) and separate DAC (the Numerik) in 1991, to minimise the jitter introduced by the SPDIF interface commonly used to connect digital audio components. In a sync link equipped CD transport and DAC, the DAC instead of having to recover its clock signal from the incoming SPDIF stream contains its own free running low noise master clock, connected directly to the D/A chips. A low frequency (almost DC) signal is fed back to the CD transport to adjust its speed, making it supply digital audio data at the rate the master clock in the DAC requires. The DAC therefore becomes the master, and the CD transport the slave.

There are other systems which try to achieve this goal, but they invariably involve sending a high speed (and high noise) clock signal from the DAC to the CD transport. The Linn sync link is unique in its silent effectiveness.

However, as mentioned above, the performance of the Ikemi and Genki is so good that the Ikemi on its own out-performs our current standalone DAC, the Numerik, even with the sync link.

Knekt.

Knekt is the versatile, flexible and powerful Linn multiroom audio system. Both the Ikemi and Genki are fully Knekt compatible making it easy to enjoy their performance all round your home. See your local installer or our website for more information.

Image 14
Contents P L AY E R O W N E R S M a N U a L Year 2000 Compliance Important safety information Avis Risque DE Choc ELECTRIQUE. NE PAS OuvrirGeneral Safety Instructions Iii CE Declaration of Conformity Contents Copyright and acknowledgements Introduction Page Page Page Hdcd Page Setting up Ikemi and Genki UnpackingReplacing the fuses Positioning the Ikemi and Genki Locating the Ikemi and Genki for use with the handsetConnecting the Ikemi and Genki IkemiMains supply Using the Ikemi & Genki Using the front panelIkemi display and controls Genki display and controlsUsing the handset Classik CD/CA Handset StandbySwitching on and off Ikemi and Genki operationDisplay information Display Description ExamplePlaying a disc Skip and Search Press Skip forward Skip to the start of the next trackDirect track number selection Repeat Play 8481Programming a selection of tracks programme mode a 00 =Programming excluding of tracks programme mode B Genki variable output Advanced CD functions Cd8? User Options Option Description ValuesServicing MaintenanceCD handling Technical support Ikemi Specifications Technical informationGenki Specifications Pack