Section | Air King B600 instruction

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

Model B600	Blower

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT

YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following:

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, OBSERVE THE FOLLOWING:

1.Read all instructions before installing or using range hood.

2.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

3.Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

4.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire- related construction.

5.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local code authorities.

CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS.

6.To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

7.Refer to the instructions included with the Range Hood Canopy for additional safety information.

INSTALLATION INSTRUCTIONS

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

WARNING: THIS BLOWER IS INTENDED FOR USE ONLY IN AIR KING PROFESSIONAL SERIES RANGEHOOD CANOPIES MARKED SUITABLE FOR USE WITH THIS BLOWER. DO NOT TO INSTALL IN ANY OTHER APPLICATION.

SECTION 1

Preparing for installation

NOTE: Before installing blower, make sure range hood canopy is properly installed and securely in place. See “Range Hood Mounting Instructions”.

1.Unpack blower from the carton and confirm that all pieces are present. In addition to the blower you should have:

8 - 8-32 Screws

8 - Washers

1 - Fuse

1 - Instruction/Safety Sheet

2.The installation of the blower is slightly different from one canopy height to another. For 18" high canopies proceed to Section 2, for 10" high canopies proceed to Section 3.

SECTION 2

Installation into 18" High Canopy

1.Lift blower up into the hood canopy and slide the keyhole slots in the motor mounting flange over the two studs of the hood. Slide the motor into place and tighten the hex nuts on the mounting stud while lining up the 8 holes in the motor mounting flange to the 8 screw studs of the hood (Figure 1).

Stud w/Hex Nuts

Screw Stud

Keyholes

Figure 1

SAVE THESE INSTRUCTIONS

111597005 New 3-07

www.airkinglimited.com

1 of 8

B600 specifications

The Air King B600 is a standout model in the world of ventilation and air conditioning solutions, specifically designed to meet the needs of both residential and commercial spaces. Recognized for its superior functionality, durability, and energy efficiency, it is an ideal choice for those seeking reliable airflow and ventilation.

One of the primary features of the Air King B600 is its robust motor, which provides exceptional airflow while maintaining low noise levels. The fan operates at varying speeds, allowing users to customize airflow based on their specific needs. With a powerful airflow rating, the B600 ensures that even large areas are adequately ventilated, making it perfect for workshops, garages, and other expansive environments.

The fan is equipped with advanced technologies that enhance its performance. One notable technology is its built-in thermostat, which enables automatic operation based on the temperature of the surrounding area. This feature not only maximizes comfort levels but also contributes to energy savings by ensuring the fan operates only when necessary. The B600 also incorporates a high-quality motor that is designed for longevity, reducing the need for frequent replacements and maintenance.

Durability is another strong characteristic of the Air King B600. Constructed from high-quality materials, this fan is resistant to wear and tear from continuous use. The finish is often rust-resistant, making it suitable for various environments, including those with high humidity or exposure to harsh elements.

Installation of the B600 is straightforward, thanks to its user-friendly design. It can be mounted on walls or ceilings, providing flexibility in terms of placement. This versatility allows users to optimize airflow and ventilation according to the unique layout of their space.

Furthermore, the Air King B600 adheres to modern energy efficiency standards, helping users reduce their environmental footprint. By consuming less power while delivering powerful performance, it is a cost-effective solution for consumers looking to lower their energy bills without compromising on quality.

In summary, the Air King B600 integrates advanced technologies, powerful airflow capabilities, durable construction, and energy efficiency into a compact and user-friendly design. Whether for residential or commercial applications, the B600 stands out as an exceptional choice for efficient ventilation and air circulation.