Linn AKURATE Loudspeaker System owner manual Connecting, General

English AKURATE 242, 225 and 212

Connecting

General

IMPORTANT:

Before making any connections, switch off your power amplifier(s).

Ensure the positive (+) or red coloured connectors from your amplifier(s), connect to the positive (+) connectors on your loudspeaker(s). And that the negative (-) or black coloured connectors from your amplifier(s), connect to the negative (-) connectors on your loudspeaker(s).

AKURATE 242 and 225

The AKURATE 242 and 225 speakers are supplied with several terminal link strips. These strips can be connected to the terminals on the back of the speakers to provide a wide variety of amplifier-speaker connection configurations. The links connect two, three, four or five terminals together allowing for single-wiring, bi-wiring, tri-wiring, or connection to up to five separate power amplifier channels. The speakers are supplied from the factory with the five-hole link strips attached.

AKURATE 212

The AKURATE 212 speaker is supplied with several link strips. These strips can be connected to the terminals on the back of the speaker to provide a wide variety of amplifier-speaker connection configurations. The links connect two, three or four terminals together allowing for single-wiring, bi-wiring, tri-wiring or connection to up to four separate power amplifier channels. The speakers are supplied from the factory with the four-hole link strips attached.

To remove/fit the link strips:

●Carefully remove the blanking plugs that are in the terminals, using a thin blade.

●Use the supplied tool to unscrew the terminal collars.

●Remove/fit the required link strips.

●Replace all the terminal collars, making sure they are tightly secured.

●Replace the blanking plugs.

AKURATE Loudspeaker System

Owner’s Manual 6