STEP 8 FINAL TOUCHES |
|
Drawer assembly. Tilt the front end of drawer up and slide into | Figure 8 |
track. Make sure track and drawer runners are properly |
|
aligned. |
|
Slide the two bottom trays (GG) into frame as shown in figure |
|
8. |
|
At this time, make sure all nuts and bolts are tightened |
|
completely using wrench and hex key wrench. Do not over |
|
tighten. Add 12mm PVC cover (K) to each end of wheel axle |
|
and 10mm PVC cover (J) to each end of the folding shelf axle |
|
as shown in figure 8. |
|
LIMITED WARRANTY
This warranty is extended to the original purchaser and applies to defects in materials and workmanship of our Outdoor Living patio furniture, provided your furniture is maintained with care and used only for personal, residential purpose.
Frames and Welds are warranted to be free from defects in materials and workmanship for a period of five years.
Exclusions: Items used for commercial, contract or other
If within the stated warranty period a product is found to be defective in material or workmanship, the purchaser must contact the manufacturer’s customer service center at
Warranty is to the original purchaser only and is
PAGE 4