AeroGarden PRO manual Do not put Cover Plate or Filter back in place at this time

Page 5

4Clean Pump (continued)

DInsert the Pump back into the Pump Tower making sure that:

•The Rubber Feet on the Pump are facing up.

•The Face Plate is facing toward you.

•The Pump Wire goes behind and underneath the Pump.

•Pump is securely seated in the tube in the Pump Tower.

•Pump Wire does not need to go into Wire Slot at this time.

•Do not put Cover Plate or Filter back in place at this time.

IMPORTANT!

ERun Dish Soap Through Pump

•Turn Grow Surface right side up and place it in AeroGarden Bowl without water. (Yes, without water… just for this step!)

NOTE: If Pump falls out, it was improperly seated in the Pump Tower. Please see Step 4D for instructions on proper placement of Pump in Pump Tower.

•Place Bowl back on Base and plug in AeroGarden. Your Pump will start at this time (listen for a humming sound or put hand on

Grow Surface to feel vibration. If your Pump Does Not Start, see

Troubleshooting on page 7.)

•Allow Pump to run for 3 minutes and then unplug AeroGarden.

FRinse Dish Soap from Pump & AeroGarden

•Remove Bowl from Base.

•Remove Grow Surface from Bowl and turn Grow Surface upside down.

•Disassemble Pump Parts (see steps 1-3 on page 4).

•Thoroughly rinse all Pump Parts, Pump, Pump Tower and Bowl in sink with hot water until no soap residue remains. Any remaining soap could harm your plants.

If you are cleaning your Pump due to noise, we recommend repeating “Clean Pump” steps 4A-4F for best results.

Face Plate Dial

GWhen you are finished cleaning the Pump, set the Face Plate Dial to “2”. (If your Face Plate does not have numbers, set the Dial to the 2 o’clock position, as shown on the black Face Plate at right.)

HReassemble Pump Parts – Impeller, Impeller Cover and Face Plate.

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents When To Clean Your Pump Why Clean Your PumpAeroGarden Components Brackets Cross BeamsGrow Surface upside down Remove & Save AeroGarden Water & Seed PodsPump Tower Remove Pump and Clean Pump TowerMissing or torn Filter? See Troubleshooting on Disassemble Pump Clean PumpDo not put Cover Plate or Filter back in place at this time Replace Grow Surface in Bowl Wire SlotReassemble Pump Replace Water & Seed Pods in AeroGarden TroubleshootingBowl on Base Missing or Torn Filters Brackets Cross BeamsAeroGrow Customer Service

PRO specifications

The AeroGarden PRO is a cutting-edge indoor gardening system that allows users to grow their own fresh herbs, vegetables, and flowers throughout the year, regardless of the season. This innovative garden utilizes advanced hydroponic technology to ensure optimal growth conditions for plants, making it suitable for both novice gardeners and seasoned green thumbs alike.

One of the standout features of the AeroGarden PRO is its capacity. With room for up to 24 different plants, users can cultivate a diverse range of produce in a compact design that fits conveniently in any kitchen or living space. This model is particularly effective for growing herbs like basil, parsley, and mint, as well as salad greens and even smaller fruiting plants like cherry tomatoes and peppers.

The AeroGarden PRO boasts an automated LED grow light system that mimics the full spectrum of sunlight, providing plants with the ideal amount of light they need to thrive. The LED lights are energy-efficient and adjustable in height, ensuring that plants receive the appropriate light as they grow. This feature not only maximizes growth but also optimizes energy consumption, making it both cost-effective and environmentally friendly.

Another key characteristic of the AeroGarden PRO is its nutrient delivery system. The system comes with pre-measured plant food pods that are specifically formulated to promote healthy growth. This nutrient solution is automatically dispensed into the water reservoir, taking the guesswork out of feeding plants and ensuring they receive the essential nutrients needed for robust development. The water reservoir is designed to hold plenty of water, requiring minimal maintenance and allowing for long growing cycles.

Integrated sensors monitor light, water levels, and nutrient levels, providing real-time feedback via an easy-to-use control panel. Users receive alerts when it’s time to add water or nutrients, ensuring their plants always have the best conditions for growth.

Moreover, the AeroGarden PRO is designed with user-friendliness in mind. Its easy-to-assemble components and clear visual instructions make set-up a breeze. The stylish design also means it can enhance the decor of any space, turning indoor gardening into an aesthetically pleasing pursuit.

In conclusion, the AeroGarden PRO is an exceptional indoor gardening system that combines advanced technologies with practical features, making it an ideal choice for anyone looking to enjoy the benefits of homegrown produce all year round.
Top Page Image Contents