Basic Reminders About Your AeroGarden

Basic Reminders About Your AeroGarden

AeroGarden Deluxe Control Panel

• Water Low

When light blinks add water up to “Fill To Here.”

• Lights On/Off

Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/ off. This will not affect the timing of your light cycle and occasional use of this feature will not harm your plants.

• Add Nutrient

(Feed Garden - Basic Feeding)

When “Add Nutrient” and “Water Low” lights start blinking (every

2 weeks), add 2 nutrient tablets* and fill the Bowl with water up to “Fill to Here.” Press and release “Reset” button to restart nutrient timer and turn off blinking lights.

*See Tending & Harvesting Guide for plant-specific nutrient information.

• Replace Grow Bulbs*

When light blinks (after 6 months of use), it is time to replace Deluxe Grow Bulbs. Replacement bulbs can be ordered at www.aerogardensupport.com or from your retailer. After replacing Deluxe Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off flashing light.

NOTE: If you store your AeroGarden Deluxe between uses, grow bulb timer automatically stops when AeroGarden Deluxe is unplugged.

*See complete replacement instructions on next page.

• 24-Hour Light

Illuminated white light indicates the AeroGarden Deluxe is on “24-Hour Light” setting.

•Remove Bio-Domes

When plants appear through hole in Seed Pod Labels, remove Bio-Domesand discard or recycle.

NOTE: Never remove Seed Pod Labels.