AeroGarden 100602-WHT, 200340 Insert new Grow Bulbs into Lamp Hood, Early Grow Bulb Replacement

Page 13

Basic Reminders About Your AeroGarden (continued)

Raise Lamp Hood (Lights)

As plants grow to 1-2” from lights, raise the Lamp Arm one notch at a time. Be sure Lamp Arm is set at the lowest setting when you start your AeroGarden.

1	Unplug Space•Saver 6 and remove Bowl from Base.	Locking Lever
2	Hold Lamp Arm where it connects to Lamp Hood with one hand.
	With other hand, push in Locking Lever.

3Release Locking Lever while pulling up on Lamp Arm.

Locking Lever will automatically click into next notch in Lamp Arm.

4 Replace Bowl on Base and plug in Space•Saver 6.

Note: When lowering Lamp Hood, be sure to hold Lamp Arm to avoid crushing plants.

Replace Grow Bulbs – Order replacement bulbs at www.aerogardensupport.com

Add Nutrients

Replace

Bulbs

Space•Saver 6 Elite

Control Panel

When “Replace Bulbs” light on Control Panel begins to blink after 6 months of use…

•Unplug Space•Saver 6.

•Remove old Grow Bulbs and carefully discard*.

IMPORTANT: To avoid burning, be sure Grow Bulbs are cool before handling.

•Insert new Grow Bulbs into Lamp Hood.

•Plug in Space•Saver 6 and press and release “Reset” button to restart grow bulb timer.

Replace

Bulbs

Space•Saver 6

Control Panel

Early Grow Bulb Replacement

If you replace Grow Bulbs before “Replace Bulbs” light illuminates, be sure to restart grow bulb timer as follows:

•Press and hold “Lights” button until white light next to your selected plant type starts blinking – about 5 seconds.

•Release “Lights” button. Plant type selected light will continue to blink for about 9 seconds. While plant light is still blinking…

•Quickly press and release “Reset” button. “Replace Bulbs” light will blink once and plant selected light will stop blinking.

*Check with local recycling authorities for light bulb recycling availability in your area.

12

Image 13

Contents Simple Steps Important Safety Instructions Unpack Your SpaceSaver Quick Start Assembly No tools requiredInsert Deluxe B Grow Bulbs into Lamp Hood Insert Lamp Arm into BaseMoving Your SpaceSaver Quick Start AssemblySet Bowl into Base Away From Place Your GardenFor Optimal Tending & Harvesting, Also Consider Planting Your Garden Add Water Using a Spouted ContainerPlan Your Garden Layout Amount Water To Be AddedCreate a Custom Garden combine two AeroGarden 3 Seed Kits Plant Your GardenSeed Pod Bio-Domes NutrientsAdd Starting Nutrient Tablets and Record Planting Date Place Bio-Domes on Seed PodsRecord Planting Date Place a Bio-Dome on each Seed PodStarting Your Garden Select SettingPlug Cord into Electrical Outlet What will happen…SpaceSaver 6 Elite24-Hour LightSetting Your Light TimerSpaceSaver 6 Elite 24-Hour Light Setting SeeYou can reset your timer as often as you wish Personalize Your Light Timer optionalBasic Reminders About Your AeroGarden Insert new Grow Bulbs into Lamp Hood Early Grow Bulb ReplacementGrow Surface and Bowl with soft cloth or sponge Pull Seed Pods out of Grow Sur- face openingsRinse Bowl and Grow Surface with tap water. Repeat Replanting Your AeroGarden