Installing New Pump
13Adjust Pump Dial to the 2 o’clock position (2 clicks).
14Insert the new Pump into the Pump Tower making sure that:
a.The rubber feet of the Pump are facing up.
b.The Pump Connector Wire goes behind and underneath the Pump.
c.Pump Cover Plate is snapped back onto top of Pump.
Connector
Screw
16Replace and screw in the Connector Screw so it is
Filter
17Place Pump Filter back into slot.
18Place Grow Surface upright on towel and gently replace plants back into their original positions on the Grow Surface.
19Place Grow Surface back into bowl and replace bowl on the Base. Press down firmly on the Grow Surface.
Congratulations...
Metal
Wire Slot
You have replaced your AeroGarden Pump!
Contact
15Plug the Pump Connector into the Grow Surface so that the Metal Contacts face up and out and the Connector Wire is inside the Wire Slot.
| If you have any questions please feel free to contact Customer Service: |
|
©2006 AeroGrow International, Inc | 300177AA | |
|