Important Safety Instructions

Explanation of symbols used on the rear or underside of the apparatus:

This symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure of sufficient magnitude to cause electric shock.

This symbol is intended to alert the user to the presence of important operation, maintenance and servicing information in the instruction and service manuals.

For apparatus connected to the mains electricity supply

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER.

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

REPLACE THE MAINS FUSE IN THE PLUG WITH ONE OF THE SAME TYPE AND RATING.

DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

SHOCK HAZARD - DO NOT OPEN.

MAINS PLUGS

This apparatus is supplied with a non-rewireable mains plug for the intended country. Replacement mains leads can be obtained from your Linn retailer. Should you need to change the plug please dispose of it carefully. A plug with bared conductors is dangerous if engaged in a live socket.

The Brown wire must be connected to the Live (Line) supply pin. The Blue wire must be connected to the Neutral supply pin.

The Green/Yellow wire must be connected to the Earth (Ground) supply pin.

Please contact your retailer or a competent electrician if you are in any doubt.

Refer to the rear or underside of the product for fuse and power consumption information.

Important Safety Information English

General Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use the apparatus near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool etc.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Site the apparatus so that its location or position does not interfere with its proper ventilation. For example, the apparatus should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and at the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug has been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Wall or ceiling mounting. Mount the apparatus to a wall or ceiling only as recommended by the manufacturer.

16.Power sources. Connect the apparatus to a power supply only of the type described in the operating instructions or marked on the apparatus.

17.Mains plug. Use the mains plug to disconnect the apparatus from the mains supply. The mains plug must be accessible at all times. Use the mains switch (if applicable) when the apparatus is not in use.

18.Power lines. An outdoor antenna should be located away from power lines.

19.Outdoor antenna grounding. If an outdoor antenna is connected to the apparatus, ensure that the antenna system is grounded to provide some protection against voltage surges and static build up. In the USA see article 810 of the National Electrical Code ANSI/NFPA 70 concerning installation requirements.

20.Telephone line. Do not connect the apparatus to a telephone line except where specifically instructed to do so.

21.Objects and liquid entry. Do not let objects or liquids fall into the apparatus. Do not expose the apparatus to dripping or splashing. Do not place a vessel containing liquid on top of the apparatus.

22.No naked flame sources, such as lighted candles, should be placed on the apparatus.

23.The apparatus has been designed for use in moderate and tropical climates.

CHAKRA Power Amplifiers

Owner’s Manual

C 4100, C 5100, C 3200, C 2100, C 3100 specifications

The Linn range of amplifiers, including models such as the C 6100, C 4200, C 2200, C 3100, and C 2100, represents a robust evolution in audio technology, designed to provide high-fidelity sound reproduction for discerning audiophiles. Each model in this lineup blends advanced engineering with a commitment to sound quality, ensuring that music is delivered with precision and detail.

The C 6100 stands at the top of the range, showcasing a powerful multi-channel architecture that can be configured for various setups, including surround sound. It features Linn’s proprietary Dynamik power supply technology, which significantly reduces noise and distortion, ensuring that dynamic audio passages are rendered accurately. The amplifier offers flexible connectivity options, including HDMI and balanced XLR inputs, making it versatile for a range of home theater configurations.

Next in the series, the C 4200 focuses on delivering exceptional performance for stereo applications. It incorporates similar Dynamik technology, ensuring clean power delivery. The C 4200 is designed with efficient heat management, which allows it to maintain optimal performance even during prolonged use. Its minimalist design aesthetics speak to its premium quality, making it a perfect fit for high-end audio setups.

The C 3100 caters to both home theater and two-channel audiophile needs. It features advanced signal processing capabilities, allowing for seamless integration with various digital sources. Utilizing Linn’s groundbreaking Exakt digital technology, the C 3100 ensures that the audio signal path remains entirely digital until it reaches the speakers, thus preserving the integrity of the sound.

The C 2200 is aimed at audiophiles seeking exceptional sound quality in a more compact and affordable package. It retains many of the advanced features found in its more expensive counterparts, such as an advanced power supply and quality components. This model is ideal for users who want both space efficiency and high performance without compromising on sound fidelity.

Last, the C 2100 serves as an entry point to the Linn amplifier family while still delivering impressive sound. It is characterized by a robust build quality and easy integration with other Linn products. It maintains a focus on the core principles of good audio performance, making it an excellent choice for those beginning their high-fidelity journey.

Collectively, this series from Linn encapsulates a commitment to craftsmanship, technological innovation, and a deep understanding of audio performance, ensuring that music lovers can enjoy their favorite recordings in the best possible quality. Each model is thoughtfully engineered to cater to different listening preferences and setups, making Linn a trusted name in high-performance audio.