Cal Spas LTR20101001 manual Chlorine Clear Water Plan, Ozonator Clear Water Plan

Page 27

Chlorine Clear Water Plan

This plan and its chemical dosages are intended for Cal Spas chemicals only. Most chemical manufacturers use different chemical formulas and strengths. Only Cal spas chemicals are specially formulated to provide chemical balance at lower dosages. Always read and follow printed instructions on chemical bottles and packages.

Day One (Monday)

1.Test spa water using “Chlorine Test Strips”.

2.Based on the Test Strip readings:

•First adjust total alkalinity (acceptable range of 80-120 ppm)

•Then adjust the pH if needed (range is between 7.2 to 7.8).

•Add 2 tablespoons of Chlorine Granules.

•The recommended level of Chlorine is 3-5 ppm.

3.Add 2 oz of “Stain and Scale Defense”.

4.Remove dirty filter from the spa and rinse off.

5.Place your extra clean filter cartridge back into the spa.

6.Vacuum debris from the bottom of your spa with the “Spa Vacuum”.

Day Two (Wednesday)

1.Test spa water using Chlorine Test Strips.

2.Based on the Test Strip reading: Adjust total alkalinity, then the pH if needed.

Day Three (Friday)

1.Test spa water using Chlorine Test Strips.

2.Based on the Test Strip reading:

•Adjust total alkalinity, then the pH if needed.

•Add 2 tablespoons of Chlorine Granules (if needed).

3.Add 2 oz of Oxidizer Shock to spa. Run Spa for 15 minutes with cover off.

4.Replace cover.

27

Water Quality Maintenance

Ozonator Clear Water Plan

This plan and its chemical dosages are intended for spas equipped with the optional Cal Zone Quest 2000 / 3000 Ozonator (portable spas only) or Del Zone Eclipse (in-ground models only). The chemical references are designed for Cal Spas chemicals only.

Start Up

1.Follow the Spa Start Up procedures for Chlorine “Clear Water Plan”.

2.Set the spa’s filtration time for “F-4”. This activates the ozonator and produces the ozone gas. (Follow the instructions in the owner’s manual)

Note: Filtration time may need to be increased with heavy bather load.

Day One (Monday)

1.Test spa water using chlorine “Test Strips”. (You will need to use a small amount of chlorine as a supplemental sanitizer.)

2.Based on the Test Strip readings:

•First adjust total alkalinity (acceptable range of 80-120 ppm),

•Then adjust the pH if needed. (Range is between 7.2 to 7.8.)

•Add 1 tablespoon of Chlorine Granules.

•The recommended level of Chlorine is 1-3 ppm.

3.Add 2 oz of “Stain and Scale Defense”.

2010 Portable Spa

LTR20101001, Rev. B

www.calspas.com

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LTR20101001, Rev. B 5/7/10 Water Quality Maintenance Important Safety InstructionsCleaning and Maintenance Using the Entertainment SystemHyperthermia Danger Important Safety InstructionsBasic Spa Information Read This FirstRead First!This ForYour New Portable Spa Preparing for Your New Portable SpaPlanning the Best Location Preparing a Good FoundationSpa Model Gfci Required Wires Required Volt Electrical InstallationRCD and Wiring Requirements Testing the RCD BreakerYour New Portable Spa Electrical Installation for 8..5 kW HeaterRCD Device RCD Wiring DiagramGas Heater Hook-up Preparing forYour New Portable Spa Filling and Powering Up Your Portable Spa OperatingYour Operating Your SpaSpa 6205 Electronic Control OperationAutomatic Time outs Setting Filtration CyclesLight OptionOperating SpaYour Diagnostic Messages MeaningOperatingYour Spa 9005 Electronic Control OperationOption Optional Blower Setting the Temperature LockPreset Filter Cycles Clean-up CycleDiagnostic Messages Periodic Reminder MessagesMessage Meaning Action Required BUF Wireless Spa Monitor Adjustable JetsAuxiliary Control Operation Adjustable Therapy System Diverter KnobsAir Venturis Pulse Mode System Multi-Colored Spa Light OperationWaterfalls Water Quality Maintenance Cal Spas Clear Water Plan Before You BeginAlternative Sanitation Options Water Quality Maintenance Chemical SafetyWater MaintenanceQuality Chemical DescriptionsFor use with any Clear Water Plan For use with the chlorine Clear Water Plan For use with the bromine Clear Water PlanFor use with the Cal Clarity Bromine Generator Day Two Wednesday Traditional Chemical Start Up Bromine Clear Water PlanStart Up Day One MondayOzonator Clear Water Plan Chlorine Clear Water PlanDay Two Friday MaintenanceWater Quality Bromine Generator Clear Water PlanMaintenance Schedule Cleaning and Maintenance Removing and Reseating the PillowsSpa Cover Freeze damage is not covered by your warranty Draining Your Portable SpaWinterizing Cold Climate Draining Periodic Maintenance Cleaning the Cover, Shell and PillowsUse of Vinyl and Leather Cleaner All-Purpose Cleaner Spa finish cleaningCleaning and Replacing the Filter Exclusive Bio-Clean Filter CartridgeFast Sheen Spa finish protecting wax Operating the CD Player Using the Entertainment SystemTheUsing SystemEntertainment Using the iPod Docking StationAppendix Replacement PartsValves Filters PillowsDrains WaterfallsLED Lights Replacement Cabinet PanelsLights Ozone CartridgesCovers Avalon SeriesDiamond Series D950N / D965N 93 x D963S / D950S Fitness SeriesGalaxy Series Family II SeriesVX901 72 x Victory Xtreme SeriesFitness Series Exercise Program Keeping Fit with your Cal SpaConnecting the Exercise Equipment Cal Spas Chemicals International WarrantyDisclaimers Proration of WarrantyWarranty Limitations and Exclusions Customer ServiceLocating the product serial number

LTR20101001 specifications

Cal Spas LTR20101001, a model that exemplifies luxury and relaxation, offers an impressive combination of features and technologies designed to enhance the spa experience. This portable hot tub is perfect for those looking to enjoy therapeutic benefits in the comfort of their own backyard.

One of the standout features of the Cal Spas LTR20101001 is its spacious seating capacity. Designed to accommodate up to five people, this spa promotes social interaction and creates an inviting atmosphere for family and friends. The ergonomic seating ensures comfort during use, allowing users to fully unwind while enjoying the soothing effects of the water.

The LTR20101001 hot tub is equipped with powerful jets strategically placed throughout the interior. These jets provide targeted hydrotherapy, which is beneficial for muscle relaxation and stress relief. The combination of adjustable jet intensities allows users to customize their spa experience according to their preferences. This versatility is a key characteristic that sets the LTR20101001 apart from other models in the market.

In terms of technology, the spa includes an advanced control system that enables users to easily manage settings such as temperature and jet configurations. The user-friendly interface ensures that even those new to hot tub ownership can operate it with ease. Additionally, the model features energy-efficient insulation and a quiet, reliable heater that maintains optimal water temperature without driving up energy costs.

The Cal Spas LTR20101001 also prioritizes safety and durability. It is constructed with high-quality materials that are resistant to fading and cracking. The spa includes built-in safety features like a locking cover and non-slip surfaces to prevent accidents during entry and exit.

Lastly, the aesthetic appeal of the LTR20101001 cannot be overlooked. With a range of color options and stylish designs, it can easily complement any outdoor setting. The spa's modern look adds a touch of sophistication to backyards, patios, or decks, making it not only a place for relaxation but also an attractive addition to outdoor spaces.

Overall, the Cal Spas LTR20101001 embodies a perfect blend of comfort, technology, safety, and style, making it an exceptional choice for anyone looking to elevate their outdoor leisure experience.
Top Page Image Contents