Demco TI110SB manual Safety, Maintenance

Page 5

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN LOSS OF TOWING VEHICLE CONTROL, SEPARATION OF THE TOW DOLLY FROM THE TOWING VEHICLE, SEPERATION OF THE TOWED VEHICLE FROM THE TOW DOLLY, CAUSING SEVERE PERSONAL INJURY, DEATH, OR PROPERTY

DAMAGE.

SAFETY

 

MAINTENANCE

 

 

Safety is of utmost importance at all times. There are

Periodically check all bolts and nuts to ensure proper

several items that must be checked each time before

tension or torque.

 

using and while using the Tow-It.

 

 

 

Make sure all bolts are properly tightened and those

An occasional drop of oil may be required on the moving

parts of the tie down winches.

 

requiring a set torque are up to specifications:

 

 

 

 

Lug Nuts -

75 to 80 ft./lbs.

Grease the center pivot pin grease

zerk every 1500

Check Lug Nut tension after the first 5 miles and

miles.

 

periodically thereafter.

 

 

 

 

The ball hitch must latch securely around the ball and

Grease the main frame platform skids every 1500 miles.

the safety lock pin or lever must be in position to lock the

These grease zerks are readily accessible from under

hitch on the ball.

the front tire stop main platform.

 

RECOMMENDED BALL HEIGHT: 18 inches to the top

Grease the Sure LubeTM Hubs every 3,000 miles.

of the ball on the towing vehicle.

Hook the towed vehicle safety chains to the frame of the

 

 

Use High Quality Bearing

vehicle directly

above the area where the chain is

 

 

Grease with Hand Operated

 

 

 

 

mounted on the Tow-It. Leave some slack in the chain

 

 

GreaseGun.

 

 

 

to allow suspension movement.

 

 

 

Check to make sure that all lights are in proper working

 

 

 

order.

 

 

 

 

Examine the winches and straps, making sure they are

 

 

 

in good conditon.

 

 

 

Be certain the safety lock pins are locking the strap

IMPORTANT LOADING INSTRUCTION

winches.

 

 

 

Check your wheel tie-down straps.

Retighten straps over the tires after the first 5 miles and

 

Your Tow-It is equipped with custom made wheel

every 50 miles thereafter. Ensure that they are tight.

tie-down straps of a standard size that will fit most

 

 

The TI110 tires must be inflated to the recommended 35

tires, however if your tires are too large or too small

PSI.

 

you will want to exchange these new straps for the

The TI110SB tires must be inflated to the recommended

proper size straps.

 

 

 

 

50 PSI.

 

 

1. Tire too large - This is very obvious. The strap

The strap on the optional tongue winch must be in good

 

 

will not basket over the tire properly; call us,

condition and should be stored neatly on winch when

 

we will provide at NO Charge on an exchange

not in use.

 

 

 

 

basis, the proper size strap. You must return

NOTE: The winch strap must not be left connected to

 

 

your new unused straps and provide us with

the towed vehicle after it is loaded and strapped down.

 

the Make and Model of your car and the tire

 

 

 

Make sure the optional light bar is fastened securely at

 

size.

 

the rear of the towed vehicle.

 

2. Tire too small - This is not as obvious. The

The wires to the optional light bar should be run along the

 

 

basket will fit down over the tire very well; the

car and fastened so as not to damage the finish of the

 

towed vehicle.

 

 

problems cannot be readily seen. You must

NOTE: This unit cannot be backed up when loaded.

 

tighten the straps down solid and then check

 

on the inside of the tire and be sure the strap,

 

 

 

All vehicles mounted on the Tow-It must be mounted

 

when tightened, does not come in contact with

with the front of the vehicle facing forward.

 

any metal that may cause wear or cutting such

Rear Wheel Drive: Disconnect the towed vehicle

 

as strut mounts. If there is contact, you need a

driveshaft for rear wheel drive vehicles with automatic

 

smaller strap, call us, we will provide on a NO

transmission.

 

 

 

 

Charge, exchange basis, the proper size strap.

For manual transmission: Consult your vehicle owners

 

manual for towing suitability with the drive shaft con-

 

You must return your new unused straps and

nected.

 

 

provide us with the Make and Model of your

 

 

 

car and tire size.

 

 

Page 5

Thank you for Purchasing

Products.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TOW-IT Table of Contents 04804 Safety Decal Parts List04508 Class Torque SpecificationsGrade Maintenance SafetyLoading Instructions Testing Lights Before USE42 min. inside to inside 70 max. body widthPage Damage Prevention Rear Wheel Drive PrecautionsOriginal Purchasers Limited Warranty 03570-95 Hook Retainer Replacement Only03571-95 03577Sure Lube TM Hub Assembly Rubber hammer or a wooden mallet TOW-IT Assembly InstructionsGreen Wiring of the Towing VehicleBrake Lines Parts List DA66 Actuator Parts Replacement onlyActuator Parts List Onto Tow It be sure to pullComponents not sold separately Left Side Breakdown 10î Brake Cluster Parts ListBrake Cluster Parts List 5495 Coupler Repair Kit Model DA91 Actuator Parts BreakdownBleeding the System Optional Winch Parts ListOptional Tool BOX Optional Spare Tire and Mount Parts BreakdownLight BAR Parts List Optional Deflector Parts ListQTY. Optional Wheel Jack w/ hardware Optional Deflector

TI110SB, TI110 specifications

The Demco TI110 and TI110SB are advanced, versatile trailer implement solutions designed for efficient farming and agricultural operations. These models are particularly known for their innovative features and technologies that enhance productivity and ease of use.

One of the primary characteristics of the Demco TI110 is its robust construction. Built with high-strength materials, these trailers are engineered to endure the rigorous demands of agricultural tasks. The rugged framework ensures longevity while maintaining performance over time, even under challenging conditions.

The TI110 and TI110SB are equipped with a wide range of functional features. A notable aspect is their user-friendly ramp system. This system allows for effortless loading and unloading of various farm equipment, significantly reducing downtime when transitioning between tasks. The trailers also feature adjustable height settings, making them compatible with different implements and tractors.

Another key feature of the TI110 and TI110SB is their enhanced towing capabilities. With a well-balanced design, these trailers provide stability during transport, ensuring that equipment stays secure on rough terrains. This stability is further supported by the trailers' heavy-duty axles and tires, which are designed to provide superior traction and support.

Technologically, the TI110 models incorporate advanced braking systems that enhance safety during operation. The hydraulic brake option ensures prompt responsiveness, which is critical when transporting heavy machinery. Additionally, the trailers come with LED lighting for improved visibility during low-light conditions, further contributing to their safety features.

Comfort and convenience also play a crucial role in the design of the TI110 and TI110SB. The ergonomic coupling mechanism allows for easy attachment and detachment from towing vehicles, reducing the physical strain on operators. The spacious deck area is versatile enough to accommodate various agricultural implements, making it a practical choice for farmers with diverse operational needs.

In summary, the Demco TI110 and TI110SB trailers are tailored for efficiency, safety, and durability in agricultural applications. With their combination of a robust construction, advanced braking technology, and user-friendly features, they serve as essential tools for modern farming operations. These models stand out as reliable implements that can significantly enhance productivity on the field, making them a valuable asset for any farmer.
Top Page Image Contents