Demco TI110SB manual Testing Lights Before USE, Loading Instructions, 42 min. inside to inside

Page 6

TESTING LIGHTS BEFORE USE

1.Check that the WHITE (ground) wire of the wiring harness is connected to the Tow-It frame and the WHITE (ground) wire is connected to the frame of the towing vehicle.

2.With headlights in "ON" position, the tail lights, the light cluster bar, the license plate light, and the clearance lights should be lighted.

3.Start engine and have someone depress brake pedal. Brake lights of tow dolly and towing vehicle should come "on" and "off" simultaneously with each application.

4.Turn left turn signal on. Left turn light of Tow-It and towing vehicle should flash simultaneously. Should the turn signal lights of the trailer function opposite to those of the towing vehicle, it is probable that the YELLOW and GREEN wires have been reversed. Check the plug connection under the tongue of the Tow-It to make sure wire colors are not crossed at that point. If plug connection is incorrect, correct problem by reversing yellow and green wire connec- tion on the towing vehicle.

Step 3. To allow the wheel platform to tilt back for loading:

1)Swing the bottom of the locking latch (C) toward the hitch far enough to allow locking pin handle to be lifted.

LOADING INSTRUCTIONS

Refer to load limits on inside of front cover.

Step 1. Secure ball coupler to 2" (3,500 lb. capacity) towing vehicle ball only. Make sure that the hitch and the hitch ball are in good condition and not rusted, loose or stripped.

Recommended ball height is 18" to the top of the ball. Make sure hitch is locked down and secured with safety clip. Criss-cross safety chains under tongue and secure to towing vehicle frame.

Step 2. Ensure that towed vehicle parking brake is fully engaged, then release the tie-down straps. NOTE: Tie down straps must be "quick -released" by grasping ratchet pawl and ratchet handle simultaneously and pushing down sharply. This process will permit easy removal of strap from winch.Remove tie-down strap hook from its storage position at the rear of the ramp. Lay the straps on the ground in front of the winches.

2)Pull locking pin toward the hitch as far as it will go. The wheel platform will tilt back to allow loading.

Step 4. Before loading (and unloading) towed vehicle make sure platform and towed vehicle are in straight alignment. Tow dolly must be completely and properly hooked up to the towing vehicle. Towing vehicle must be larger and at least 1000 lbs. heavier than the tow dolly and towed vehicle com- bined.

IMPORTANT: Tire tread width or body width of towed vehicle must not exceed:

TI110 -

70" max. (outside to outside),

TI110SB

42" min. (inside to inside),

 

70" max. (body width)

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents TOW-IT Table of Contents Safety Decal Parts List 0450804804 Torque Specifications GradeClass Safety Maintenance42 min. inside to inside Testing Lights Before USELoading Instructions 70 max. body widthPage Rear Wheel Drive Precautions Damage PreventionOriginal Purchasers Limited Warranty 03571-95 Hook Retainer Replacement Only03570-95 03577Sure Lube TM Hub Assembly TOW-IT Assembly Instructions Rubber hammer or a wooden malletWiring of the Towing Vehicle GreenActuator Parts List DA66 Actuator Parts Replacement onlyBrake Lines Parts List Onto Tow It be sure to pullComponents not sold separately 10î Brake Cluster Parts List Brake Cluster Parts ListLeft Side Breakdown Model DA91 Actuator Parts Breakdown Bleeding the System5495 Coupler Repair Kit Optional Tool BOX Parts ListOptional Winch Optional Spare Tire and Mount Parts BreakdownQTY. Optional Wheel Jack w/ hardware Optional Deflector Parts ListLight BAR Parts List Optional Deflector

TI110SB, TI110 specifications

The Demco TI110 and TI110SB are advanced, versatile trailer implement solutions designed for efficient farming and agricultural operations. These models are particularly known for their innovative features and technologies that enhance productivity and ease of use.

One of the primary characteristics of the Demco TI110 is its robust construction. Built with high-strength materials, these trailers are engineered to endure the rigorous demands of agricultural tasks. The rugged framework ensures longevity while maintaining performance over time, even under challenging conditions.

The TI110 and TI110SB are equipped with a wide range of functional features. A notable aspect is their user-friendly ramp system. This system allows for effortless loading and unloading of various farm equipment, significantly reducing downtime when transitioning between tasks. The trailers also feature adjustable height settings, making them compatible with different implements and tractors.

Another key feature of the TI110 and TI110SB is their enhanced towing capabilities. With a well-balanced design, these trailers provide stability during transport, ensuring that equipment stays secure on rough terrains. This stability is further supported by the trailers' heavy-duty axles and tires, which are designed to provide superior traction and support.

Technologically, the TI110 models incorporate advanced braking systems that enhance safety during operation. The hydraulic brake option ensures prompt responsiveness, which is critical when transporting heavy machinery. Additionally, the trailers come with LED lighting for improved visibility during low-light conditions, further contributing to their safety features.

Comfort and convenience also play a crucial role in the design of the TI110 and TI110SB. The ergonomic coupling mechanism allows for easy attachment and detachment from towing vehicles, reducing the physical strain on operators. The spacious deck area is versatile enough to accommodate various agricultural implements, making it a practical choice for farmers with diverse operational needs.

In summary, the Demco TI110 and TI110SB trailers are tailored for efficiency, safety, and durability in agricultural applications. With their combination of a robust construction, advanced braking technology, and user-friendly features, they serve as essential tools for modern farming operations. These models stand out as reliable implements that can significantly enhance productivity on the field, making them a valuable asset for any farmer.
Top Page Image Contents