Dolmar PB-250.4 instruction manual Method of operation

Page 5

Method of operation

Use the blower only in good light and visibility. During cold seasons beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing.

Never work on unstable surfaces or sleep terrain.

To reduce the risk of personal injury, do not direct air blast towards bystanders, since the high pressure of the air flow could injure eyes and could blow small objects at great speed.

Never insert any foreign object into the air intake of the machine or into the nozzle of the blower. It will damage the fan wheel and may cause serious injury to the operator or bystanders as a result of the object or broken parts being thrown out at high speed.

• Pay attention to the direction of the wind, i.e., do not work against

(10)

the wind.

 

To reduce the risk of stumbling and loss of control, do not walk backward while operating the machine.

Always shut off the engine before cleaning or servicing the unit or replacing parts.

Maintenance instructions

Be kind to the environment. Operate the blower with as little noise and pollution as possible. In particular check the correct adjustment of the carburetor.

Clean the blower at regular intervals and check that all screws and nuts are securely tightened.

Never service or store the blower in the vicinity of open flames, sparks, etc. (11).

Always store the blower in a well-ventilated locked room and with an emptied fuel tank.

Observe and follow all relevant accident prevention

 

instructions issued by the trade associations and by

(11)

insurance companies. Do not perform any modifications to

the blower as this will risk your safety.

 

The performance of maintenance or repair work by the user is limited

 

to those activities as described in this instruction manual. All other

 

work is to be done by Authorized Service Agents.

 

Use only genuine spare parts and accessories supplied by DOLMAR.

 

Use of non-approved accessories and tools means increased risk of

 

accidents and injuries. DOLMAR will not accept any liability for accidents

 

or damage caused by the use of any non-approved attachment or

 

accessories.

 

First Aid

In case of accident make sure that a well-stocked first-aid kit is available in the vicinity of the operations. Immediately replace any item taken from the first aid kit.

When asking for help, please give the following information:

• Place of accident

 

• What happened

 

• Number of injured persons

 

• Extent of injuries

 

• Your name

(12)

Packaging

The DOLMAR blower is delivered in a protective cardboard box to prevent shipping damage. Cardboard is a basic raw material and is therefore consequently reusable or suitable for recycling (waste paper recycling).

5

Image 5
Contents Importante PB-250.4 English Table of Contents15meters Safety InstructionsMeters Resting Transport Refuelling Maintenance Tool ReplacementMethod of operation NGK CMR6A SpecificationDesignation of Parts Always wear protective gloves Assembly InstructionsPoint 2 in Replacement of Oil If oil spills out Point 1 in Replacement of Oil Oil GaugeBefore Start of Operation Inspection and Refill of Engine OilPoints for Fuel Storage of machine and refill tankStarting When the engine is cold, or when the fuel it refueledOperation Checkup of low-speed rotation Adjustment of IdlingStopping Dust Collection Operation Operation MethodBlower operation Points in replacement of engine oil Inspection and MaintenanceReplacement of engine oil Checking the spark plug Cleaning of air cleanerCleaning of parts Cleaning the fuel filterReplacement of gaskets and packings StorageFault location State of abnormality Probable cause malfunction Remedy TroubleshootingEmission Compliance Period Owners Warranty Responsibilities Manufacturers Warranty CoverageWhat is not Covered What is CoveredHOW to File a Claim Waranty Commencement DateMaintenance Statements Where to GET Warranty ServiceParts Covered Under the California Emission Warranty Repair and Replacement of EMISSION-RELATED Parts Obtaining Warranty Service HOW to Make a Claim