Linn Kolektor CE Declaration of Conformity, FCC notice, Standard number Date of issue Test type

Page 6

iv

CE Declaration of Conformity

Linn Products Ltd declare that this product is in conformance with the Low Voltage Directive 73/23/EEC and Electromagnetic Compatibility 89/336/ EEC as amended by 92/31/EEC and 93/68/EEC.

The conformity of the designated product with the provisions of Directive number 73/23/EEC (LVD) is proved by full compliance with the following standards:

Standard number

Date of issue

Test type

EN60065

1993

General requirements

 

 

Marking

 

 

Ionizing

 

 

Heating under normal conditions

 

 

Shock hazards under normal

 

 

operating conditions

 

 

Insulation requirements

 

 

Fault conditions

 

 

Mechanical strength

 

 

Parts connected to the mains supply

 

 

Components

 

 

Terminal devices

 

 

External flexible cords

 

 

Electrical connections and

 

 

mechanical fixings

The conformity of the designated product with the provisions of Directive number 89/336/EEC (EMC) is proved by full compliance with the following standards:

Standard number

Date of issue

Test type

EN55013

1994

Conducted emissions

EN55013

1994

Absorbed emissions

EN60555-2

1987

Harmonics

EN60555-3

1987

Voltage fluctuations

EN55020

1994

Immunity

FCC notice

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Linn Kolektor Page Important safety information Avis Risque DE Choc ELECTRIQUE. NE PAS OuvrirGeneral Safety Instructions Mains plug replacement Mains voltage operating range. See specifications sectionReplacing the fuse Standard number Date of issue Test type CE Declaration of ConformityFCC notice Contents Technical information Copyright and acknowledgements Viii Introduction Your Linn Kolektor Audio moduleControl module Interface module Special features of the KolektorIndependent source settings Bass and treble controlsUser options Configurable source namesRecording lock Intelligent operation with other Linn productsSetting up the Kolektor UnpackingPositioning the Kolektor Replacing the fusesLocating the Kolektor for use with the handset Connecting the Kolektor Connecting the sourcesConnecting to a power amplifier Connecting a phono sourceConnecting a tape recorder Connecting headphonesConnecting the mains supply Using the Kolektor Using the front panelPress this key To do this SRC- and SRC+VOL- and VOL+ Using the handset LinnSelecting a source Switching on and offTo switch on Input Display Handset button DescriptionChanging the volume To select a sourceTo select a source directly from the handset To mute the sound To change the volumeChanging the balance To change the balanceChanging the bass and treble To change the bass or trebleTo set up a recording To cancel a recordingRecording a source Configuring the inputs Using a moving magnet phono sourceRemoving inputs To start configuring inputs To select the input to renameTo change the name of the currently selected input To save the new input namesDisplay Handset button Description Changing user options To change the user optionsTo choose a specific user option To change the value of the currently displayed user option To save the user optionsUser options Number Name Description ValuesNumber Name Description Values Factory default settings To reset the KolektorThere is no sound from the speakers TroubleshootingPoor response to handset commands Cannot change sourcesMaintenance CleaningTechnical support America Linn Incorporated 4540 Specifications GeneralAudio Connections Linn Interconnect cables Lock indicatorIndex Keys Introduction Key functionsPhono input, positioning 7 phono source connecting VOL- and VOL+ keys 12 Voltage selection Volume, changing Unpacking User options 5Page Page Page Page LI N N

Kolektor specifications

Linn Kolektor represents a remarkable step in the evolution of high-fidelity audio systems, tailored specifically for discerning audiophiles and music enthusiasts. As a pioneering high-end audio processor, it showcases a blend of advanced technologies and refined aesthetics designed to deliver an unparalleled listening experience.

At the heart of Linn Kolektor lies a powerful digital signal processing engine that supports a range of audio formats and high-resolution file types. This ensures that users can enjoy their music in exceptional clarity, regardless of the source. The Kolektor boasts support for various streaming protocols, including UPnP and Apple AirPlay, enabling seamless connections to a wide array of digital audio sources.

One of the standout features of the Linn Kolektor is its extensive customization capabilities. Users can tailor their sound experience through an intuitive user interface, allowing for fine-tuning of parameters such as equalization, surround sound settings, and room correction. This personalization ensures that listeners can adapt the audio output to suit their environment and individual preferences.

The Kolektor also employs advanced DAC (Digital-to-Analog Conversion) technologies. These high-quality DACs minimize distortion and maximize dynamic range, ensuring that every nuance of the original recording is preserved. Additionally, the device's signal path is engineered to reduce noise and interference, further enhancing audio fidelity.

Connectivity is a vital aspect of the Linn Kolektor's design. It features multiple digital and analog inputs, making it versatile enough to integrate with various audio components, including turntables, CD players, and modern streaming devices. The device also incorporates multiple outputs, allowing users to connect to different amplification systems or multi-room setups.

Constructed with an emphasis on high-quality materials and build precision, the Linn Kolektor exemplifies luxury in its design. Its sleek, minimalist form factor allows it to blend seamlessly into any home audio setup while maintaining an elegant presence.

Overall, the Linn Kolektor stands out as a robust and sophisticated audio processor. With features that cater to both high-resolution audio and personalized soundscapes, it is positioned as an essential component for anyone serious about achieving the ultimate audio experience. Whether streaming music from a modern device or playing classic vinyl, the Linn Kolektor delivers a level of quality and ingenuity that resonates with audio enthusiasts around the world.
Top Page Image Contents