Exmark 4500-686 Rev. B manual Specifications, Model Numbers, Systems, Dimensions

Page 12

Specifications

Specifications

Model Numbers

Serial Nos: 920,000 and Higher

ECSKAP21; ECSKA21; ECSHN21; ECXKA21; ECXHN21; ECXKABBC21; ECXHNBBC21

Systems

Engine

Engine Specifications: See your Engine Owner’s Manual

Engine Oil Type: Exmark 4–Cycle Premium Engine Oil

RPM:

ECSHN21: 3000 RPM (No Load)

All units except ECSHN21: 3300 RPM (No Load)

Fuel System

• Capacity:

ECSHN21, ECSKA21 and ECSKAP21 Units: 2.0 qt (1.9 L)

All other units: 4.0 qt (3.8 L)

Type of Fuel: Regular unleaded gasoline, 87 octane or higher; containing no more than 10% methanol or ethanol.

Fuel Filter: Non-replaceable, in tank

Fuel Shut-Off Valve:

ECSKA21 and ECSKAP21 Units Do Not have a shut-off valve.

All other units have a shut-off valve.

Cutting Deck

Cutting Width: 21 inches (53.3 cm)

Blade Brake: When the blade engagement control is moved to the disengaged position a friction brake pad stops the rotation of the blades.

Blade Size: (1 ea.): 20.88 inches (53.0 cm)

Deck: 21 inches rigid. Deck design allows for bagging, mulching or rear discharge.

Cutting Height Adjustment:

Adjusts from 1 inch (2.5 cm) to 4 1/2 inches (11.4 cm) in 1/2 inch (1.3 cm) increments.

Mulching Kit: Standard on ECXKA21; ECXHN21; ECXKABBC21, and ECXHNBBC21 Units

Rear Discharge Kit: Optional

Dimensions

Curb Weight:

98-122 lb (44-55 kg) Weights may vary slightly depending on engine option.

Overall Width:

22 inches (55.9 cm)

Safety Interlock System

For units without a Blade Brake Clutch: Operator must have the blade control bail depressed to start the engine. Releasing the blade control bail will cause the engine to stop.

Transmission (Self Propelled Units)

Variable

Speed Range: 0–4.2 mph (6.8 km/hr)

Overall Length and Height at

2 1/2 inch Cutting Height:

Handle Setting

Length

Height

High

61.00

inches

39.00

inches

 

(154.9 cm)

(99.1 cm)

Medium

63.00

inches

37.50

inches

 

(160.0 cm)

(95.3 cm)

Low

64.50

inches

35.00

inches

 

(163.8 cm)

(88.9 cm)

12

Image 12
Contents Commercial California Introduction Contents Safety Safety Alert SymbolSafe Operating Practices TrainingSafety Operation Maintenance and Storage Slope OperationSafety and Instructional Decals 109-9317 116-1922 116-2685 117-2718 116-1900 116-2737 Specifications DimensionsModel Numbers SystemsProduct Overview OperationControls Blade Control BailEngine Stop Switch Throttle-Choke Lever ECXHN21Choke Control ECXHNBBC21 Blade Control Lock Lever Blade Brake Clutch Units OnlyHandle Adjustment Pre-StartOperating Instructions Open the Fuel Shut-Off Valve Starting the EngineUsing the Mulch Plug Stopping the EngineAuthorized Service Dealer Test Using the Grass Bag Adjusting the Cutting HeightUsing the Grass Bag Operating Tips Maintenance Recommended Maintenance SchedulesCheck Engine Oil Level Checking the Blade Brake Clutch Blade Brake Clutch OnlyEmptying the Fuel Tank and Cleaning the Fuel Filter section Check the Mower BladeCheck for Loose Hardware Service Air Filter Kawasaki Units Service Air Filter ECSHN21 UnitsService Air Filter ECXHNBBC21 and ECXHN21 Units Damaged or excessively dirtyChange Engine Oil Emptying the Fuel Tank and Cleaning the Fuel Filter Change Oil Filter ECXKA21 and ECXKABBC21Check Condition Of Belt Self-Propelled Units Only Check Spark PlugsAdjustments Adjusting the Self-Propel Drive Self-Propelled Units OnlyAdjustment of drive cable nuts Clean Grass Build-Up Under Deck Cleaning the Discharge Tunnel and PlugCleaning Under the Belt Cover Self-Propelled Units Only Screws BBC Shield Waste Disposal Motor Oil DisposalStorage Preparing the Fuel SystemPreparing the Engine General Storage InformationTroubleshooting Problem Possible Cause Corrective ActionTroubleshooting Exmark Commercial Turf Equipment Page See EXMARK’S Complete Line of Accessories and Options

4500-686 Rev. B specifications

The Exmark 4500-686 Rev. B is a cutting-edge commercial mower that embodies the perfect blend of performance, durability, and user-friendly features. Designed for professional landscapers and grounds maintenance professionals, this mower is built to handle the rigorous demands of large properties and commercial applications.

One of the standout features of the Exmark 4500-686 Rev. B is its powerful engine. Equipped with a robust EFI (Electronic Fuel Injection) engine, it delivers exceptional power and fuel efficiency. The engine's advanced technology allows for quicker starts and better throttle response, ensuring that users can tackle their mowing tasks without any delays. This efficiency translates into reduced operating costs and less time spent refueling.

Another notable technology integrated into this mower is the UltraCut deck system. The 4500-686 Rev. B features a precision-engineered cutting deck that provides a superior cutting performance, offering an even and professional finish to any lawn. The design promotes optimal airflow beneath the deck, resulting in better grass lift and dispersion, which reduces clumping and enhances the quality of the cut. Additionally, the cutting height is easily adjustable, allowing operators to customize their mowing according to specific turf conditions.

User comfort is a paramount consideration in the design of the Exmark 4500-686 Rev. B. The mower is equipped with an ergonomic seat and controls that minimize operator fatigue during extended use. The full-suspension seat absorbs shocks and vibrations, while the easy-to-use controls allow for intuitive operation, ensuring that mowing is a seamless and productive experience.

Durability is another key characteristic of the 4500-686 Rev. B. Built with high-quality materials and components, this mower is designed to withstand the wear and tear of everyday use. The frame is reinforced to provide added strength, while the corrosion-resistant coating ensures that it maintains its appearance and functionality over time.

In conclusion, the Exmark 4500-686 Rev. B is an exceptional choice for anyone looking for a reliable and efficient commercial mower. With its powerful EFI engine, advanced cutting technologies, emphasis on operator comfort, and rugged build quality, this mower offers unmatched performance in the field. Whether for professional landscaping or maintaining large properties, the Exmark 4500-686 Rev. B is engineered to meet the demands of any mowing job.