Exmark PHZ19KA343CA manual Recommended Maintenance Schedules

Page 21

Maintenance

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

WARNING

While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

After the first 5 hours

Change the engine oil.

 

 

 

After the first 250 hours

Change the hydraulic filter.

 

 

 

• Check the engine oil level.

 

Check the mower blades.

Before each use or daily

• Check the safety interlock system.

• Check for loose hardware.

 

 

• Clean the engine air cooling system.

 

• Clean the grass build-up from under the deck.

 

 

 

Every 25 hours

Grease the belt idlers.

 

 

 

• Check the hydraulic oil level.

Every 40 hours

• Check the tire pressures.

• Check the condition of the belts.

 

 

• Grease the deck pivots.

 

 

Every 50 hours

• Service the air cleaner. (May need more often under severe conditions. See the Engine

 

Owner’s Manual for additional information.)

 

 

 

 

 

Every 80 hours

Remove engine shrouds and clean cooling fins.

 

 

 

Every 100 hours

Change the engine oil. (May need more often under severe conditions.)

 

 

Every 160 hours

• Grease the brake handle pivot.

• Check the spark plugs.

 

 

 

 

Every 500 hours

Change the hydraulic filter (Every 250 hours/yearly if using Mobil 1 15W50)

 

 

 

Monthly

Check the battery charge.

 

 

 

• Grease the front caster wheel bearings.

Yearly

Grease front caster pivots.

 

• Lubricate the caster wheel hubs.

 

 

 

21

Image 21
Contents Phazer California Introduction Contents Safety Alert Symbol SafetySafe Operating Practices TrainingSafety Slope Operation OperationMaintenance and Storage Safety Safety and Instructional Decals Safety 109-2494 Specifications Model NumbersSystems Dimensions Torque Requirements Product OverviewControls OperationOperating Instructions Pre-StartDisengaging the PTO Stopping the EngineDriving the Machine Adjusting the Cutting Height TransportingTransporting a Unit Loading a Unit Recommended Maintenance Schedules MaintenanceCheck Battery Charge Check Engine Oil LevelCheck Mower Blades Check for Loose Hardware Check Safety Interlock SystemChange Engine Oil Service Air CleanerCheck Hydraulic Oil Level Check Tire PressuresLubricate Caster Wheel Hubs Lubricate Grease FittingsCheck Spark Plugs Change Fuel FilterChange Hydraulic System Filter Thread Locking Adhesives Fuel Tank Mounting Hardware SpecificationsMobil HTS Grease Or Food-Grade Anti-seize Dielectric GreaseMotion Control Linkage Adjustment Electric Clutch AdjustmentDeck Leveling Pump Drive Belt TensionClean Engine Air Cooling System Adjust Throttle Lever TensionRemove Engine Shrouds and Clean Cooling Fins Clean Grass Build-Up Under DeckBattery Disposal Waste DisposalMotor Oil Disposal Problem Possible Cause Corrective Action TroubleshootingTroubleshooting Electrical Diagram SchematicsTAN Black Blue .LT Electrical Logic SchematicExmark Commercial Turf Equipment Page Service Record Page Page See EXMARK’S Complete Line of Accessories and Options