Exmark TT20KCC, TT23KAC, TT23KCC Maintenance & Adjustments, Transporting, Periodic Maintenance

Page 23

4.4 TRANSPORTING

WARNING

POTENTIAL HAZARD

Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

The ramps could collapse causing the unit to fall, which could cause injury.

HOW TO AVOID THE HAZARD

Use proper ramps that are secured to the truck or trailer.

Keep feet and legs out from under the unit when loading and unloading.

If necessary, use assistance when loading.

Use a heavy duty trailer to transport the machine. Engage neutral lock latches and park brake, then block wheels.

Securely fasten the machine to the trailer with straps, chains, cables, or ropes.

Be sure that the trailer has all necessary lighting and marking as required by law and use a safety chain.

5.MAINTENANCE & ADJUSTMENTS

5.1PERIODIC MAINTENANCE

WARNING

POTENTIAL HAZARD

If you leave the key in the ignition switch, someone could start the engine.

WHAT CAN HAPPEN

Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

Remove the key from the ignition switch and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

POTENTIAL HAZARD

The engine can become very hot.

WHAT CAN HAPPEN

Touching a hot engine can cause severe burns.

HOW TO AVOID THE HAZARD

Allow the engine to cool completely before service or making repairs around the engine area.

- 18 -

Image 23
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Training SafetySafety Alert Symbol Your Safety is InvolvedCarbon monoxide can kill you Potential Hazard Operation Page Maintenance and Storage Riding Attachments Safety SignsPage Specifications Assembly Instructions Charging the battery may produce explosive gasses Support PIN Location Mower Deck InstallationDrive Wheels Familiarize Yourself with the Controls Service Hydraulic OILPerform Necessary Adjustments Grease UnitDrive LEVER, Neutral Lock Latch Operation InstructionsOperating Instructions PRE-STARTPotential Hazard Drive LEVER, Neutral Lock Latch Operation Transporting Maintenance & AdjustmentsPeriodic Maintenance Clean engine air cooling system Blade Bolt Installation Page Page Service Interval After First 250 hrs, then yearly thereafter Charge Pump Location Locations Pumps Places Interval Lubrication ChartPage Adjustments Left Hand Side Shown Hydro Drive Linkage Adjustment Neutral Safety Switch AdjustmentHydro Control LINKAGE/SWIVEL Adjustment Hydro Pump Spring Tension Setting Waste Disposal Trouble ShootingProblem Engine TroubleshootingEngine Troubleshooting Table Hydraulic Schematic Wiring Diagrams Limited Warranty Exmark Commercial Turf Equipment WarrantyPage Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care