Exmark 4500-435 manual Introduction

Page 3

Introduction

CONGRATULATIONS on the purchase of your Exmark StandOn. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation.

This manual contains assembly, operating, maintenance, adjustment, and safety instructions for your StandOn.

BEFORE OPERATING YOUR MOWER, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY.

By following the operating, maintenance, and safety instructions, you will prolong the life of your StandOn, maintain its maximum efficiency, and promote safe operation.

If additional information is needed, or should you require trained mechanic service, contact your authorized Exmark equipment dealer or distributor.

All Exmark equipment dealers and distributors are kept informed of the latest methods of servicing and are equipped to provide prompt and efficient service in the field or at their service stations. They carry ample stock of service parts or can secure them promptly for you from the factory.

All Exmark parts are thoroughly tested and inspected before leaving the factory, however, attention is required on your part if you are to obtain the fullest measure of satisfaction and performance.

Whenever you need service, genuine Exmark parts, or additional information, contact an Authorized Service Dealer or Exmark Customer Service and have the model and serial numbers of your product ready.

Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided.

Figure 1

1. Model and serial number location

Model No.

Serial No.

3

Image 3
Contents Standon All Rights Reserved Introduction Contents Safety Safety Alert SymbolSafe Operating Practices Maintenance and Storage Safety and Instructional Decals Tire SpecificationsDimensions Model NumbersAssembly Diagram SetupMounting the Pull Frame Installing the StandOn Rider to MowerFor Turf Tracer HP and Metro HP Units Mounting the Pull Arm and PlatformPull arm assembly Pull frame Quick connect pins Transporting OperationPre-Start Operating InstructionsLubricate Grease Fittings MaintenanceInspect StandOn Check StandOn for BuildupLubricate Caster Wheel Hubs Service Interval YearlyAdapter Plate and Tire Adjustment AdjustmentsExmark Commercial Attachments and Accessories Service Record Page See EXMARK’S Complete Line of Accessories and Options