Exmark 103-0656 manual Main Frame Group, Nut, whizlock 3/8-16

MAIN FRAME GROUP

Ref.			Qty.		Ref.			Qty.
No.	Part No.	Description	Req'd.		No.	Part No.	Description	Req'd.
1	1-643255	Track, seat (4” adjustable) ...		1	23	32128-20	Nut, whizlock 5/16-18		4
2	103-0287	Seat (All units except 26hp Koh)		1	24	1-513762	Clip, loom (.50)		1
3	1-543401	Spacer, seat track		2	25	1-303335	Plastic tie (lrg)		1
4	322-3	Screw, 5/16-18 x 3/4		6	26	1-513592	Ball, (red) throttle cable		1
5	103-0290	Cushion, seat		1	27	321-6	Screw, 1/4-20 x 1.0		1
6	103-0289	Cushion, backrest		1	28	32128-33	Nut, whizlock 1/4-20		1
7	103-0292	Cushion, armrest (RH)		1	29	1-513658	Bumper		2
8∗	103-0291	Cushion armrest (LH)		1	30	3256-23	Washer, 5/16 SAE flat		8
9	1-633696	Cable, throttle		1	31	1-633859	Seat Frame		1
10	1-603336	Cable, choke		1	32	323-6	Screw, 3/8-16 x 1		2
11	1-642324-03 Frame, engine deck		1		33	1-633964-03 Stop, Park Brake			1
12	1-633970	Wheel/tire assy. (60” & 72”) .		2	34♦	1-633872-03 Stop/Spacer
	1-633993	Tire, 24x12-12 4 ply (60” & 72”)		2		(26 HP Kohl & 23 & 27 HP Kaw liq-cooled )			2
	1-633992	Wheel (60” & 72”)		2	35	103-0284	Tab, Armrest Adjustment		2
	1-653010	Wheel/tire assy. (52”)		2	36	322-7	Screw, 5/16-18 x 1 1/2		2
	1-653160	Tire, 23x9.5-12 4 ply (52”)....		2	37	1-633349	Spring, Compression		2
	1-653158	Wheel (52”)		2	38∇	1-633821	Seat, Suspension (26hp Koh ) 1
13	1-633965-03 Front, Console			1		1-631845	Kit, Pan w/seat & back		1
14	1-632187-03 Frame, seat mount			1		1-631844	Kit, Armrest Assy		1
15	242-50	Nut, wheel 1/2-20		8		1-631843	Kit, Boot, upper&lower wire ..		1
16	1-633293	Rod, seat hold-up		1		1-631842	Kit, ArmrestPad w/hardwre ...		1
17	322-5	Screw, 5/16-18 x 1		1		1-631846	Kit, Damper w/hardware		1
18	323-39	Screw, 3/8-16 x 5		2		1-631847	Kit, Rollers, bumpers&hrdwre		1
19	3296-2	Nut, nyloc #10-24		2		1-631848	Kit, Spring,Cable & hardware		1
20	3296-29	Nut, nyloc 5/16-18		3		1-631849	Kit, Knob,Shaft & hardware ..		1
21	3296-39	Nut, nyloc 3/8-16		2		1-643281	Switch, Seat		1
22	1-807513	Screw, #10-24 x 1/2		2	39	3290-357	Nut, whizlock 3/8-16		1

∗Not Illustrated

∇The suspension seat is standard on the Kohler 26 HP EFI units, it is an optional kit on other units PN MSSLZ.

♦The stop/spacer is installed with the slotted holes to the rear on 26HP Kohler units and the slotted holes to the front on Kawasaki liquid-cooled units. NOTE: If a Suspension Seat is installed on a Kawasaki liquid-cooled unit the stop/spacer must be turned around and re-installed with the slotted holes to the rear.

Exmark black touch up spray paint - gloss black

11