Ferris Industries 5900972, 5900645, 5900636, 5900646, 5900638, 5900635, 5900637 2014550198 & Above

Page 17

Parking Brake Handle

The parking brake is released by pushing DOWN on the parking brake handle until it stops. To engage the parking brake, pull UP on the handle until it locks over center.

Engine Kill/Operator Presence

Handles

These handles are a major factor in the safety interlock system of the mower. The handles are not tied together, but the safety switches are, so depressing one handle will operate the safety interlock system. The operator must depress the handles in order to deactivate the engine kill system. Handles must be depressed to disengage the parking brake and engage the PTO switch.

Throttle Control

The throttle controls engine speed. Move the throttle forward to increase engine speed and back to decrease engine speed. Always operate at FULL throttle.

Choke

Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require choking. Pull the knob UP to close the choke. Push to knob DOWN to open the choke.

Neutral Return Pedal

The neutral return pedal provides a hands-free return to neutral. This is used in conjunction with the Reverse Speed Control Levers (B) to properly stop the machine.

See the Operation section for steering instructions.

Fuel Tank Cap

To remove the cap, turn counterclockwise.

Cutting Height Adjust Handle

The Cutting height adjust handle controls the mower cutting height. To adjust the mower cutting height, turn the crank handle clockwise to raise the cutting height. Turn the crank handle counterclockwise to lower the cutting height.

Features & Controls

S/N: 2014550198 & Above

Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

 

OFF

Stops the engine and shuts off the

 

 

electrical system.

 

RUN

Allows the engine to run and powers

 

 

the electrical system.

 

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

PTO (Power Take Off) Switch

The PTO switch engages and disengages the mower. Pull UP on the switch to engage, and push DOWN to disengage.

15

Image 17
Contents Mower Deck Tractor Combo ModelsModel Number Description 5100647Product Reference Data Table of Contents Safety Rules & Information Operating SafetySlope Operation Fuel and Maintenance Training OperationDo Not Slope OperationSafe Handling of Gasoline Maintenance and StorageCE Identification TAG Markings Identification NumbersNorth American ModelsALL Models North American Models CE Models Export Safety DecalsSafety Decals Operational Safety Checks Safety Interlock System / Safety IconsSafety Interlock System CE Safety Icons CE Safety IconsNorth American Safety Icons Control Functions Features & Controls2013964104 & Below Forward Speed Control Lever Reverse Speed Control LeversPTO Power Take Off Switch Ignition SwitchCutting Height Adjust Handle Parking Brake Handle2013964105 2014550198 & Above Checks Before Starting General Operating SafetyOperation Stopping the Mower Starting the EngineTo Move Forward and SET Forward Speed See Figure Driving the MowerTo Move Backward See Figure To make a left-hand turn See FigureIncrease forward movement speed To make a right-hand turn See FigureMowing Recommendations MowingHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods When and How Often to MowMowing Patterns Proper Broadcast MowingProper Mulching Pushing the Mower by HandStarting After Long Term Storage StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 Days250 Fall Use Hours Regular MaintenanceBefore Every Spring Each Checking / Adding Fuel Check Tire PressuresFuel Filter Inspect Muffler and Spark ArresterChange AIR Filter Check Hydraulic OIL LevelChange OIL & Filter Oil LubricationGrease Tool Cleaning the Battery and CablesPositive + Cable & Terminal Negative Cable & TerminalBalancing the Blade Servicing the Mower BladesTroubleshooting the Mower TroubleshootingTroubleshooting the Mower Deck Troubleshooting, Adjustment & RepairTroubleshooting Common Cutting Problems Troubleshooting, Adjustment & RepairDeck Lift ROD Timing Adjustment Mowing Height AdjustmentMeasure Deck Leveling AdjustmentMe asure FirstPTO Clutch to Deck Belt Mower Belt ReplacementCheck / Adjust the Mower Belt Idler Tensioner Spring Length Troubleshooting, Adjustment & RepairTransmission Drive Belt Replacement Neutral Adjustment Transmission Neutral & Tracking AdjustmentsTracking Adjustment If Machine Veers to the LeftTo Bleed Air From Transmissions Transmission MaintenanceChanging Oil & Filters Checking Battery Voltage Battery ServiceCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryThis HOOK-UP for Negative Ground Vehicles Specifications Engine SpecificationsAlign this Edge with a Vertical Surface Page Ferris Limited Warranty OPERATOR’S Manual

5900633, 5900647, 5900972, 5900644, 5900637 specifications

Ferris Industries has consistently pushed the envelope in landscaping equipment with their notable series of mowers, particularly evident in model numbers 5900636, 5900638, 5900635, 5900647, and 5900645. Each of these models reflects their commitment to durability, efficiency, and performance, making them ideal for both commercial and residential use.

The 5900636 model is recognized for its impressive cutting width and powerful engine, providing users with a robust solution for tackling large lawns or expansive commercial areas. It is engineered with a heavy-duty frame that ensures stability, while its advanced suspension system enhances maneuverability and comfort during extended use. The ergonomic controls and comfortable seating add to the user experience, making it suitable for long hours of operation.

Meanwhile, the 5900638 stands out due to its innovative cutting technology. This model features a precision cutting deck that enables a clean cut, resulting in a well-manicured appearance for lawns. Additionally, it boasts a state-of-the-art grass collection system that minimizes clumping and ensures efficient debris management. This results in a healthier lawn and less time spent on cleanup.

The 5900635 is tailored for those who prioritize speed without compromising quality. Equipped with a high-performance engine, it allows for rapid mowing without sacrificing power or efficiency. Its fuel-efficient design ensures that users can cover larger areas with less downtime for refueling. The model also incorporates advanced safety features, promoting secure operation.

The 5900647 and 5900645 models are perfect for professionals who require versatile equipment. Both feature adjustable cutting heights, allowing users to customize their mowing based on the type of grass or terrain they are working with. The user-friendly interface simplifies operation, while the durable tires provide excellent traction on various surfaces. Their design is also optimized for easy transport and storage, making them convenient for contractors who may need to move equipment frequently.

In conclusion, Ferris Industries' models 5900636, 5900638, 5900635, 5900647, and 5900645 embody the brand's dedication to innovation and quality in landscaping equipment. With advanced features and technologies, they cater to a broad range of mowing needs, from residential lawns to commercial landscaping, ensuring users achieve the best results while enjoying a comfortable and efficient mowing experience.