Flymo 340XC, 360 Cutting Height Adjustment, Starting and Stopping, Removing and Fitting the Blade

Page 9
Cutting Height Adjustment

Cutting Height Adjustment

Cutting Height Adjustment

•Height of cut is adjusted by raising or lowering the wheels using the height adjustment lever (Q)

•There are five heights of cut on this product.

•NOTE

A medium height of cut is recommended for most lawns.

The quality of your lawn will suffer and collection will be poor if you cut too low.

Q

Starting and Stopping

To Start your Lawnmower

1.Connect female extension cable connector to the back of the switchbox. (R)

2.Form loop in mains cable and push the loop through the slot. (S)

3.To secure, position loop over the hook and pull the cable back through the slot (T).

4.Connect plug to mains and switch on.

5.Tilt the handle downwards to slightly raise the front of the lawnmower and to reduce the risk of lawn damage

whilst starting.

The switchbox is provided with a lock-off button (U1) to prevent accidental starting.

6.Press and hold the lock-off button (U) on the switchbox, then squeeze one of the Start/Stop levers towards the upper handle (V).

6.Continue to squeeze the start/stop lever towards the upper handle and release the lock-off button (W).

7.Lower the lawnmower to its proper operating position and commence mowing.

•NOTE - There are two start/stop levers fitted. Either one can be used for starting the lawnmower.

•IMPORTANT - Do not use the start/stop levers intermittently

To Stop your Lawnmower

1. Release the pressure on the Start/Stop lever.

R

T

V

S

U

1

W

Removing and Fitting the Blade

Switch off, wait until the blade has stopped rotating and disconnect from the mains electricity supply BEFORE attempting to remove or refit the blade. Always handle the blade with care - sharp edges could cause injury.

USE GLOVES. Removing the Blade

1.To remove the blade bolt, hold the blade firmly with a gloved hand and with a spanner, loosen the blade bolt by turning it anti-clockwise (X).

2.Remove the blade bolt, blade and adaptor. (X)

3.Inspect for damage and clean as necessary.

Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one.

Fitting the Blade

1.Attach the adaptor to the shaft.

2.Fit the blade to the adaptor ensuring that once it is fitted you are able to read the text on the blade ‘This side to grass’

3.Re-assemble blade bolt through the blade and the adaptor.

4.Hold the blade firmly with a gloved hand and tighten the blade bolt firmly with a spanner. Do not over tighten.

X

blade bolt

blade

adaptor

PAGE 8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents IMPORTANTuse INFORMATIONRead beforeMultimo Carton ContentsMultimo 340XC PAGESafety Multimo 360XCMultimo 420XC General Maintenance and storageElectrical PreparationRoller Assembly CablesIMPORTANT INFORMATION Page Page Grassbox Full Window How to MowMulching Plug Your product can be used to cut grass using the following methodsStarting and Stopping Cutting Height AdjustmentRemoving and Fitting the Blade To Start your LawnmowerReplacement Parts Service Recommendations Fault Finding HintsEasi-Reel Cable Winder XC models only Environmental InformationEC Declaration of Conformity Guarantee & Guarantee Policy5100693-02 Type
Related manuals
Manual 9 pages 2.51 Kb

340XC, 420XC, 420, 360, 360XC specifications

The Flymo EASICUT 500 and EASICUT 420 are innovative cordless electric hedge trimmers designed for maintenance and care of hedges and shrubs in residential gardens. These models are recognized for their efficiency, maneuverability, and user-friendly features, making garden upkeep a less daunting task.

One of the standout features of the Flymo EASICUT 500 and EASICUT 420 is the lightweight design, allowing users to handle the trimmers with ease even during extended periods of use. Weighing significantly less than many traditional hedge trimmers, both models provide comfort and reduced fatigue, making them ideal for both professional landscapers and home gardeners.

Both trimmers are equipped with laser-cut precision blades, which ensure a clean and smooth cut. This not only enhances the appearance of hedges and shrubs but also promotes healthier plant growth by preventing jagged edges. The EASICUT 500 boasts a blade length of 50 cm, while the EASICUT 420 has a slightly shorter 42 cm blade, catering to different garden sizes and trimming requirements.

The trimmers feature ergonomic handles designed for optimal grip and control. This thoughtful design reduces the likelihood of strain and discomfort during operation. Furthermore, they include a safety switch that ensures the device only operates when intended, enhancing user safety.

Powering the Flymo EASICUT series is an efficient battery system that delivers impressive run time with a quick charging capability. This cordless technology frees users from the hassle of tangled cords, allowing for unrestricted movement around the garden. The EASICUT series also has a low noise operation, making it perfect for use in residential areas without disturbing neighbors.

Additionally, the EASICUT models are designed with a protective blade guard, ensuring safe storage and transportation. This feature further extends the longevity of the blades by preventing accidental damage.

Overall, the Flymo EASICUT 500 and EASICUT 420 are excellent choices for those seeking efficient, lightweight, and user-friendly hedge trimmers. With their advanced technology, safety features, and precision cutting capabilities, these trimmers are well-suited to help you maintain a beautiful and healthy garden with ease.
Top Page Image Contents