TO COPY CASSETTE TAPES (TAPE DUBBING)
To record from a
1.Press the Power Switch, the Power/Batt. Indicator will light.
2.Press the Tape Switch, and the Tape Indicator Lamp will light.
3.Place the
4.Place the blank cassette in Deck B with full reel on the left side. Push the Pause Button first, then the Record and Play Buttons together so that they both lock down.
5.Release BOTH Pause Buttons on Deck A and Deck B. Both cassettes will start and the music on the
6.When the recording is completed on one side, if you want to record on the other side, turn both cassettes over to the other side and repeat above steps 2 to 4.
7.If the tapes have reached the end, the automatic stop feature will activate and stop the recording. Remove both tapes from the tape compartments.
8.To hear what you recorded, follow TO PLAY A CASSETTE TAPE instructions on page 13. Remember to rewind the tape to the beginning then press Play.
HIGH SPEED DUBBING
To make recordings faster, slide the Dubbing Speed Switch to HIGH speed position before starting recording. Remember to return the switch to NORMAL position for playback.
AUTOMATIC LEVEL CONTROL (ALC)
This set has the latest Automatic Level Control circuitry, therefore, it is not necessary to adjust the Volume Control when recording. This circuit automatically records at the correct level and prevents over loading.
NOTE : While recording, you may adjust the Volume Control or Bass Boost Switch as you desire without affecting the recording operation.
TO RECORD FROM THE BUILT-IN AM/FM RADIO
1.Load the blank cassette tape into Deck B (recording deck) with full reel on the left side.
2.Locate the portion of the tape where you desire to start recording by using the Rewind (or Fast Forward) feature or start at the beginning of the tape.
3.Follow the instructions TO PLAY THE RADIO (see page 8).
4.Make sure the Power Switch is ON. Press the Radio Switch and the Radio Indicator Lamp will light.
5.Tune into the station you want to record, press the Cassette Record Button and Cassette Play Button simultaneously. Both buttons should remain in their down positions when released. If the Record Button cannot go down, see page 17. Do not force this button down. Or if button does not stay down, your tape may have reached the end of the tape, reverse it so that full reel is on the left side.
6.You are now recording from the
7.To stop the recording manually, press the Cassette Stop/Eject Button.
8.To shut off the set, press the Power Switch. The Power/Batt. Indicator will go off.
N O T E : When you want to play the cassette tape after recording, press the TAPE Switch and the Cassette Rewind Button, and then press the Cassette Play Button. Adjust the Volume Control and the Bass Boost Switch to your taste.
15 |
| |
|