TO RECORD FROM THE BUILT-IN MICROPHONE
1.Load a blank cassette tape into the Cassette Deck B (Play/Record Deck) with full reel on left side.
2.Make sure the Power Switch is in ON position, and the Tape Switch Indicator Lamp is ON.
3.Press the Cassette Record Button and Cassette Play Button at the same time. Both buttons should remain in their depressed positions when released. If the Record Button cannot go down, see page 17. Do not force this button down. Or if button does not stay down, your tape may have reached the end of the tape, reverse it so that full reel is on the left side.
4.When you talk in front of the set, your voice will be recorded. You are now recording using the
5.To stop the recording manually, press the Cassette Stop/Eject Button.
6.To hear what you recorded, press the Cassette Rewind Button and the Cassette Play Button.
7.To shut off the set, press the Power Switch. The Power/Batt. Lamp will go off.
TO RECORD FROM A COMPACT DISC
1.Load a blank cassette tape into Deck B (Play/Record deck) with full reel on the left side.
2.Load a CD and close the CD Door.
3.Press the Power Switch and the CD Switch ON, the Power/Batt. Lamp and CD Indicator Lamp will light.
4.Press the Cassette Pause Button.
5.Press the Cassette Record and the Cassette Play Button for record
N O T E :When pressing the Cassette Record Button, the Cassette Play Button will automatically go down (If the Record Button cannot go down, see page 17. Do not force this button down. Or if button does not stay down, your tape may have reached the end of the tape, reverse it so that full reel is on the left side. ).
6.Start the CD playing by pressing the CD Play/Pause Button.
7.Press (and release) the Cassette Pause Button when you wish to start recording.
8.You are now recording the CD music onto your cassette tape.
9.Press the Cassette Stop/Eject Button to stop recording.
10.The recording will stop when the tape has reached the end and the Cassette Record and Play Buttons will pop up.
11.To hear what you recorded, press the Tape Switch, then press Rewind and Play.
12.To shut off the set, press the Cassette Stop/Eject Button, and then press the Power Switch, the Power/Batt. Lamp will go off.
TO ERASE A TAPE
Simply record any new song, the old song will be erased automatically.
N O T E :If you cannot press the Cassette Record Button down, see RECORD LEVER INTERLOCK information on Page 17, or your tape may have reached the end. Remove the tape and flip it over to the other side or press Rewind.
CAUTION:
•The automatic stop mechanism may not operate during playback of tape when the set is using batteries and the batteries are weak.
•Disconnect the AC power cord plug from the AC outlet if the set is not going to be used for a long period of time (2 weeks or more). Also remove the batteries.
•Do not leave any tape buttons down when the set is not in use, or else the pinch roller could be damaged.
•Remember when inserting tapes, the full reel must be on the left side.
•If the Cassette Play Button pops up, your tape has reached the end, reverse the tape or press the Rewind Button.
16 | E | |
|