Carton Contents
Switch Levers
Battery Pack
Charger
Cradle
IMPORTANT !
Handguard
instruction
manual
blade cover
Charger
Please check the contents of the carton are correct BEFORE assembling your new product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct | Fax : 01325 302530 | |
Telephone : 0844 844 4558 UK | 1800 882 350 ROI | |
Safety
If not used properly this product can be dangerous! This product can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and effi- ciency in using this product. The operator is responsible for following the warning and safety instructions in this manual and on the product.
Explanation of Symbols on your product
Warning.
Read the user instructions carefully to make sure you understand all the controls and what they do.
Do not use in the rain or leave the product out- doors while raining.
The use of eye protection is recommended.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term ‘“power tool” in the warnings refers to your
1)Work area safety
a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose con- trol.
2)Electrical safety
a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or grounded sur- faces, such as pipes, radiators, ranges and refrigera- tors. There is an increased risk of electric shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk electric shock.
d)Do not abuse the cord. Never use the cord for carry- ing, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of elec- tric shock.