How to Use
How to Use your Hedgetrimmer
1.Inspect area to be cut before each use - re- move objects which can be thrown or be- come entangled in the cutting blades.
2.Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position.
3.Allow the cutting blades to reach full speed before entering the material to be cut.
4.Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc.
5.If blade stalls, immediately stop the Hedgetrim-
mer and clear jammed debris from the cutting blades. Inspect blades and repair or replace as needed.
Top Cutting
Use a wide sweeping motion. (H) A slight down- ward tilt of the cutting blades in the direction of motion gives the best cutting results.
Side Cutting
When trimming the sides of the hedge, begin at the bottom and cut upwards (J), tapering the hedge in- ward at the top. This shape will expose more of the hedge, resulting in more uniformed growth.
H
J
Caring for your Hedgetrimmer
Cleaning (K)
1.Using a soft brush - remove debris from all air intakes and cutting blade.
2.Wipe over surface of your hedgetrimmer with a dry cloth.
•IMPORTANT
Never use water for cleaning your hed- getrimmer. Do not clean with chemicals, in- cluding petrol, or solvents - some can destroy critical plastic parts.
Lubricating the Cutting Blade
For easier operation and longer life, lubricate the cutter blades before and after use. Apply the oil so that it runs between the two blades. (L).
At the end of the Cutting Season.
1.Clean your Hedgetrimmer thoroughly.
2.Check that all nuts and bolts are secure.
3.Visually inspect the Hedgetrimmer for any worn or damaged parts, contact your local Service Centre if any parts require replace- ment.
To store your Hedgetrimmer
•Ensure the blade cover is fitted before stor- age.
•Store in a dry place where your Hedgetrim- mer is protected from damage.
K |
L |