SAFETY PRECAUTIONS
Operation cont 
Always ensure the blade has stopped, by releasing the engine stop lever, before tilting the mower for transport- tation or crossing surfaces other than grass.
Never operate the machine with defective guards, or with out safety devices, for example deflectors and/or grass bag in place.
Do not change the engine governor settings or overspeed the engine.
Start the engine carefully, with feet well away from the cutterblade and always disengage the rear roller drive clutch before starting the engine.
Do not tilt the mower when starting the engine.
Do not start the engine when standing in front of the discharge chute.
Do not put hands or feet near or under rotating parts.
Never pick up, carry the machine or lift the rear deflector while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.
Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the dis-
charge chute.
- Before cleaning/checking or working on the ma- chine.
-After striking a foreign object. Inspect the machine for damage and ensure necessary repairs are made before
-If the machine starts to vibrate abnormally (check immediately).
Stop the engine:
-Whenever you leave the mower.
-Before refuelling.
Maintenance & Storage 
Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace if necessary.
Inspect the exhaust periodically and replace if worn or leaking.
Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease.
Check the rear deflector and grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
Wear strong work gloves when removing and reassem- bling the cutterblade.
Control Symbols
SlowFast
STOP
Engine Stop | Engine Start | Height of Cut Adjustment | Variable Speed Control |
6