111-1471 (C) 29/8/08 12:56 pm Page 1.15
OPERATING THE MOWER
Step 3
Allow the engine to warm up and move the throttle lever to the ‘fast’ 
position after starting a cold engine.
To prevent damage never pull the engine start grip when the engine is running.
Electric Start
(Electric start Only)
Stand behind the mower and hold the handlebar together with the engine stop lever. Turn the ignition key in a clockwise direction and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine.
Note: Cranking the engine for more than 15 seconds in any one minute can damage the starter motor.
If necessary the engine can be started manually without using the ignition switch.
To prevent engine damage do not operate the ignition key when the engine is running.
Forward Travel
Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas.
Ground speed may be adjusted by operating the speed variator control. Push forward to slow down and pull back to speed up. Only operate the lever with the engine running to prevent damage.
If the engine stop lever is released the engine will stop.
1.15