Hayter Mowers 561F, 560F manual Lubrication, 13mm Fig

Page 27

111-1471 (C) 29/8/08 12:56 pm Page 1.27

MOWER MAINTENANCE

Continued Clutch Cable Adjustment

Fig. 2

3. If the distance between the clutch lever and handlebar is less than 60mm regulate the engagement position with the black plastic cable adjuster. Refer to Fig 1 and 2 to regain the 60mm distance.

1

4.Note this is a temporary adjustment and at the nearest opportunity a service should be carried out to ensure the spring on the clutch cable is attached to the gearbox clutch. This adjustment should be done using the metal adjuster at the control with the plastic adjuster reset fully wound in. When the spring is set tighten the inner lock nut to secure position.

13mm Fig. 3

extension

Clutch spring

HAY-G00147-A

Clutch lever Fig. 4 fully engaged

Metal adjuster

Tighten the inner nut when the cable spring is set.

HAY-G00146-A

Lubrication

Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours.

Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing.

1.27

Image 27

Contents Harrier Main Features /SPECIFICATIONS Main FeaturesSpecifications 1st Year 12 months 111-1471 C 29/8/08 1256 pm Contents Introduction Limited Warranty WarrantyPreparation Safety PrecautionsSafety Alert Symbol TrainingOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageInformation Symbols Safety SymbolsGrassbag Attachment Delivery ChecklistAssembling the Mower HandlebarCheck Oil Level Before Starting the MowerPrevent Engine Damage Oil TypeStep Operating the MowerControls Starting StepForward Travel Electric StartReverse Travel TurningStopping Height of Cut SlopesBefore Mowing GrassbagWithout Grass Collection Non-Grassed Areas Friction DiscLawn Care Calendar November AugustSeptember OctoberMaintenance Schedule Engine Mower MaintenanceThrottle Cable Adjustment Carburettor AdjustmentsAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceDeck Housing Clutch Cable AdjustmentSecuring Nuts & Bolts 13mm Fig LubricationCutterblade Removal Cutterblade AssemblyCutterblade Sharpening Storage 14hrs Battery chargingProblem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of Conformity111-1471 C 29/8/08 1256 pm Item No. Description Upper Mainframe Parts ListUpper Mainframe Parts List 560 561 Lower Mainframe Parts ListDetail a Item No Description Qty Item Note 560 561 Lower Mainframe Parts List 111-1471 C 29/8/08 1256 pm 111-1471 C 29/8/08 1256 pm Customer Information /NOTES