Hayter Mowers 455E Storage, Preparing the Fuel System, Preparing the Engine, General Information

Page 28

Storage

To prepare the mower for off-season storage, perform the recommended maintenance procedures. Refer to Maintenance.

Store the mower in a cool, clean, dry place. Cover the mower to keep it clean and protected.

Preparing the Fuel System

Petrol can vaporize if you store it over long periods of time and explode if it comes into contact with an open flame.

•Do not store petrol over long periods of time.

•Do not store the mower with petrol in the fuel tank or the carburettor in an enclosure with an open flame. (For example, a furnace or a water heater pilot light.)

•Allow the engine to cool before storing it in any enclosure.

Empty the fuel tank when mowing the last time before storing the mower.

1.Run the mower until the engine stops from running out of fuel.

2.Prime the engine and start it again.

3.Allow the engine to run until it stops. When you can no longer start the engine, it is sufficiently dry.

Preparing the Engine

1.While the engine is still warm, change the oil from the crankcase. Refer to Changing the Engine Oil.

2.Remove the spark plug.

3.Using an oil can, add about one tablespoon of oil to the crankcase through the spark plug hole.

4.Slowly rotate the engine several times, using the starter rope, to distribute the oil.

5.Install the spark plug but do not connect the wire to the spark plug.

General Information

1.Clean the mower housing. Refer to Cleaning under the Mower Housing.

2.Clean any dirt and chaff from the cylinder, cylinder head fins, and blower housing.

3.Remove grass clippings, dirt, and grime from the external parts of the engine, the shrouding, and the top of the mower housing.

4.Check the condition of the blade. Refer to Maintaining the Cutting Blade.

5.Clean the BBC shield; refer to Cleaning the Blade Brake Clutch Shield.

6.Service the air filter; refer to Servicing the Air Filter.

7.Lubricate the pivot arms; refer to Lubricating the Pivot Arms.

8.Tighten all nuts, bolts, and screws.

9.Touch up all rusted or chipped paint surfaces with paint available from an Authorized Service Dealer.

Removing the Lawn Mower from Storage

1.Check and tighten all fasteners.

2.Remove the spark plug and spin the engine rapidly using the starter to blow excess oil from the cylinder.

3.Clean the spark plug or replace it if it is cracked, broken, or if the electrodes are worn.

4.Install the spark plug and torque it to 17 ft-lb (23 N-m).

5.Perform any needed maintenance procedures; refer to Maintenance.

6.Fill the fuel in the fuel tank with fresh petrol.

7.Check the engine oil level.

8.Connect the wire to the spark plug.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 21in Heavy-Duty Walk-Behind Rotary Mower Contents IntroductionSafety General Lawn Mower SafetyTraining PetrolMaintenance and Storage PreparationStarting OperationSound Pressure Sound PowerVibration, Hand/arm Safety and Instructional Decals 110-2115Setup Installing the HandleParts needed for this procedure ProcedureNo Parts Required Procedure Installing the Fuel Tank and the Fuel LineFilling the Crankcase with Oil Specifications Throttle settings are shown in FigureProduct Overview ControlsOperation Service Interval Before each use or dailyChecking the Engine Oil Level Filling the Fuel Tank Clean around the fuel tank cap FigureRemove the cap from the tank Starting the Engine Operating the BladeStopping the Engine Engaging the BladeOperating the Traction Drive Adjusting the Cutting HeightChecking the Blade Brake Clutch Using the Grass Bag Installing the Grass BagRemoving the Grass Bag Lower the rear doorOperating Tips Mowing with the Grass BagGeneral Tips Cutting GrassPage Maintenance Recommended Maintenance SchedulesLubrication Lubricating the Pivot ArmsLubricating the Gear Case Engine MaintenanceServicing the Air Filter Changing the Engine Oil Changing the Oil FilterInstall the new filter and hand tighten it 2/3 turn only Servicing the Spark PlugFuel System Maintenance Drive System MaintenanceEmptying the Fuel Tank and Cleaning the Fuel Filter Adjusting the Self-propel DriveServicing the Wheels Removing the WheelsAssembling the Wheels Remove the screws from the lower anchor bracket FigureControls System Maintenance Adjusting the Blade Brake CableSpring Cable clamp screw Brake cable conduit Blade Maintenance Maintaining the Cutting BladeRemoving the Blade Inspecting the BladeCleaning Cleaning under the Mower HousingCleaning the Blade Brake Clutch Shield Tip the mower on its right sideStorage Preparing the Fuel SystemPreparing the Engine General InformationTroubleshooting Problem Possible Cause Corrective ActionPage Limited Warranty Date of Sale Your Local Dealer

455E specifications

The Hayter Mowers 455E is a standout choice for homeowners and garden enthusiasts seeking a reliable and efficient lawn mower. This robust machine is designed for high performance, making lawn care easy and enjoyable. With a passion for quality and craftsmanship, Hayter continues to build on its reputation for creating exceptional gardens and outdoor spaces.

One of the main features of the 455E is its 4-in-1 functionality, offering the capability to mow, mulch, side discharge, and collect grass clippings. This versatility allows users to tailor their mowing experience based on lawn conditions and personal preferences. The mower’s 53 cm cutting width is perfect for medium to large lawns, enabling a quicker and more efficient mowing process.

The 455E is powered by Hayter’s innovative electric start system. Unlike traditional mowers, which require pulling a cord to start, the electric start technology simplifies the process with the push of a button. This feature is especially beneficial for those who may find manual starting challenging. The mower is equipped with a powerful 158cc Loncin engine that delivers reliable performance and excellent fuel efficiency, allowing for longer mowing sessions without frequent refueling.

Additionally, the Hayter Mowers 455E features a fully adjustable cutting height, ranging from 25mm to 70mm. This allows users to achieve their desired grass length and maintain a healthy lawn throughout the seasons. The mower also boasts a robust steel deck construction, ensuring durability and stability during use. The quality of the materials used in its manufacture underlines Hayter’s commitment to providing long-lasting, dependable garden solutions.

Comfort is another focus of the 455E design. With an ergonomic handle that can be adjusted to different heights, users can mow their lawns without unnecessary strain. The foldable handles further add to the product's convenience, making storage easy and efficient.

In summary, the Hayter Mowers 455E combines advanced technology, versatility, and user-centric features to deliver an outstanding lawn care experience. Its 4-in-1 capabilities, electric start, powerful engine, adjustable cutting heights, and comfortable design make it a top choice for anyone looking to keep their lawn in pristine condition. With the 455E, maintaining a beautiful garden has never been easier.
Top Page Image Contents