Hayter Mowers 433F Maintenance & Storage, Stop the engine and disconnect the spark plug lead

Page 10

111-2300 (A) 23/5/08 2:41 pm Page 1.10

SAFETY PRECAUTIONS

Operation

Do not tilt the mower when starting the engine.

Do not put hands or feet near or under rotating parts.

Never pick up or carry the mower while the engine is running.

Never lift the rear deflector while the engine is running.

Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.

Stop the engine and disconnect the spark plug lead:

-Before clearing blockages or unclogging the discharge chute.

-Before cleaning/checking or working on the mower.

-After striking a foreign object. Inspect the mower for damage and ensure necessary repairs are made before re-starting.

-If the mower starts to vibrate abnormally (check immediately).

Stop the engine:

-Whenever you leave the mower.

-Before refuelling.

-Reduce throttle control setting during engine shutdown and turn fuel valve off at the conclusion of mowing.

Maintenance & Storage

Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.

Frequently check fuel lines and fittings for cracks or leaks and replace if necessary.

Never check for a spark when the spark plug is removed. (Use approved tester)

Inspect the exhaust periodically and replace if worn or leaking.

Never crank the engine with the spark plug removed.

Never start the engine with the air-cleaner or air-cleaner cover removed.

Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or spark.

Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease.

1.10

Image 10
Contents Motif Main Features Main Features / SpecificationsSpecifications 1st Year 12 months 111-2300 a 23/5/08 241 pm Contents Introduction Warranty Limited WarrantyTraining Safety PrecautionsSafety Alert Symbol PreparationOperation Maintenance & Storage Stop the engine and disconnect the spark plug leadSafety Symbols Control SymbolsHandlebar Delivery ChecklistAssembling the Mower Grassbag AttachmentOil Type Before Starting the MowerPrevent Engine Damage Check Oil LevelStarting Step Operating the MowerControls StepSlopes TurningStopping Height of CutGrassbag Before MowingWithout Grass Collection Non-Grassed Areas Lawn Care Calendar October AugustSeptember November25Hrs or Every Season Maintenance ScheduleDaily 50Hrs or Every SeasonCarburettor Adjustments Mower MaintenanceEngine Oil Service Air Cleaner ServiceSpark Plug Service Keeping Engine CleanClutch Cable Adjustment Deck HousingSecuring Nuts & Bolts Lubrication Cutterblade RemovalCutterblade Assembly Storage Trouble Shooting Problem Possible Fault RemedyAutodrive Model Parts List EC Declaration of ConformityList QtyDescription 432 433 434 Item Note 09787 Bracket Handlebar LH Only for Code 432/3/4 111-2300 a 23/5/08 241 pm Customer Information