Hayter Mowers 433F, 434F, 435F, 432F manual Oil Service, Air Cleaner Service

Page 22

111-2300 (A) 23/5/08 2:41 pm Page 1.22

MOWER MAINTENANCE

Oil Service

Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions.

Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:-

1.Drain fuel by running the engine until the fuel tank is empty.

2.Remove the spark plug lead.

3.Allow the engine to cool.

4.Drain the oil while the engine is warm.(Not hot)

5.Tip the mower over on to its right hand side thus ensuring that the air cleaner is kept uppermost to prevent engine damage.

6.Remove the oil filler dipstick and drain the oil into a suitable container.

7.Refill with new oil of the recommended SAE viscosity grade. (Refer to-‘Before Starting the Mower’)

Air Cleaner Service

23

1

To service the air cleaner remove the air cleaner cover (1) by release- ing two top catches (2) and tilting away from body until lower tabs release. Remove cartridge (3) and clean by tapping gently on a flat sur- face. If very dirty or damaged replace.

-Do not brush

-Do not use petroleum solvents.

-Do not oil the cartridge.

After servicing, install the cartridge in the cover. Insert the tabs on the bottom of the cover into the slots in the bottom of the base. Tilt the cover upwards until the two catches (2) hold it in place.

1.22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Motif Main Features Main Features / SpecificationsSpecifications 1st Year 12 months 111-2300 a 23/5/08 241 pm Contents Introduction Warranty Limited WarrantyTraining Safety PrecautionsSafety Alert Symbol PreparationOperation Maintenance & Storage Stop the engine and disconnect the spark plug leadSafety Symbols Control SymbolsHandlebar Delivery ChecklistAssembling the Mower Grassbag AttachmentOil Type Before Starting the MowerPrevent Engine Damage Check Oil LevelStarting Step Operating the MowerControls StepSlopes TurningStopping Height of CutGrassbag Before MowingWithout Grass Collection Non-Grassed Areas Lawn Care Calendar October AugustSeptember November25Hrs or Every Season Maintenance ScheduleDaily 50Hrs or Every SeasonCarburettor Adjustments Mower MaintenanceEngine Oil Service Air Cleaner ServiceSpark Plug Service Keeping Engine CleanClutch Cable Adjustment Deck HousingSecuring Nuts & Bolts Lubrication Cutterblade RemovalCutterblade Assembly Storage Trouble Shooting Problem Possible Fault RemedyAutodrive Model Parts List EC Declaration of ConformityList QtyDescription 432 433 434 Item Note 09787 Bracket Handlebar LH Only for Code 432/3/4 111-2300 a 23/5/08 241 pm Customer Information
Top Page Image Contents