CONNECTING TO HOME STEREO SYSTEMS
The Line Out Jack is made to accept a stereo mini plug (3.5mm). By using a commercially available audio line cable (not included), simply connect the cable’s mini plug to the Line Out Jack on your player, and the other appropriate end usually RCA JACKS to the CD/AUX INPUTS of your home stereo.
NOTE: Always switch the power off before making any connections between the player and any other set.
NOTE: The Volume Control of your player becomes inoperable whenever Line Out Jack is used. Adjustments are made on your audio system.
TO AUX IN JACKS | TO LINE OUT JACK |
YOUR STEREO | OPTIONAL CABLE | YOUR CD PLAYER |
SYSTEM |
| |
3.5mm TO RCA JACKS |
| |
|
|
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soapy water, and then wipe clean.
CLEANING THE LENS
A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest using a special cleaning disk (not included) available in most music and
You may use a cotton swab very slightly dampened with alcohol to clean the lens (start in the middle and work you way out).
11 |
| |
|