Hayter Mowers manual Installing the Fuse Model 447F Only, Charging the Battery Model 447F Only

Page 7

Installing the Fuse (Model 447F Only)

Your mower comes with a 40-amp fuse that protects the electric starter.

Important: You cannot start the mower with the electric starter or charge the battery unless you install the fuse.

1.Remove the battery cover and the battery and locate the fuse holder (Figure 7).

Charging the Battery (Model 447F Only)

Refer to Charging the Battery in the Maintenance section.

 

 

Figure 7

 

1.

Screw

3.

Fuse holder

2.

Battery cover

4.

Battery

2.Insert the fuse (from the loose parts bag) into the fuse holder (Figure 8).

Figure 8

Note: Your mower comes with a fuse in the owner’s packet and another fuse in the battery box.

3. Install the battery and the battery cover.

7

Image 7
Contents Code 446F, 447F Serial No and Up Manual Part No -3375 Rev a R48 Recycling MowerIntroduction ContentsGeneral Lawn Mower Safety SafetyVibration, Hand/arm Sound PowerMaintenance and Storage Sound Pressure110-7059 Safety and Instructional DecalsUnfolding the Handle SetupFilling the Engine with Oil Charging the Battery Model 447F Only Installing the Fuse Model 447F OnlyFilling the Fuel Tank Product Overview OperationChecking the Engine Oil Level Using the Self-propel Drive Adjusting the Cutting HeightStarting the Engine Bagging the Clippings Installing the Grass BagStopping the Engine Recycling the ClippingsRemoving the Grass Bag Operating TipsRear-discharging Clippings General Mowing TipsCutting Leaves Preparing for Maintenance MaintenanceRecommended Maintenance Schedules Premaintenance ProceduresReplacing the Air Filter Engine MaintenanceLubrication Lubricating the Wheel GearsReplacing the Fuse Model 447F Only Electrical System MaintenanceAdjusting the Self-propel Drive Drive System MaintenanceReplacing the Blade Blade MaintenancePreparing the Mower for Storage CleaningCleaning the Mower StoragePage Page 1st Year 12 months Page Limited Warranty Date of Sale Your Local Dealer