Hayter Mowers 341A, 3401 manual Lubrication, Cutterblade Removal

Page 25

MOWER MAINTENANCE

Lubrication

Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours.

Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing.

Cutterblade Removal

Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to cool. Turn the mower on its left hand side and ensure that the air clean- er side of the engine is uppermost.

Firmly grip the end of the cutterblade with the gloved hand and remove the bolt, spring washer and distance piece securing the cutterblade with a 9/16” A/F spanner.

1CG480V33C

To prevent accidents never work on the cutterblade unless the spark plug lead has been removed. The cutterblade has sharp edges. ALWAYS wear strong gloves to protect your hands when working on the cutterblade. DO NOT rotate tools towards the cut- ting edges to avoid the risk of injury should the tool slip. ALWAYS use genuine Hayter replacement parts.

The condition of the cutterblade and its mounting arrangement should be checked regularly for signs of wear or damage. Ensure that the cut- terblade is not bent or cracked.

A damaged cutterblade that is out of balance will vibrate excessively and may break. DO NOT use an unbalanced cutterblade.

Regularly check that the bolt securing the cutterblade is tightened to the specified torque of 54Nm.

Replace the cutterblade every 2 years of sooner if excessively worn or damaged.

To prevent injury it is wise to seek assistance when turning the mower on its side.

1.25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Harrier Main Features Main Features /SPECIFICATIONSSpecifications 1ST Year 12 months Page Contents Introduction Limited Warranty WarrantySafety Alert Symbol Safety PrecautionsTraining PreparationOperation Stop the engine and disconnect the spark plug lead Maintenance & StorageDecal Symbols Safety SymbolsAssembling the Mower Delivery ChecklistHandlebar Grassbag AttachmentPrevent Engine Damage Before Starting the MowerOil Type Check Oil LevelControls Operating the MowerStarting Step StepForward Travel Electric StartTurning StoppingHeight of Cut SlopesBefore Mowing GrassbagFriction Disc Without Grass CollectionNon-Grassed Areas Lawn Care Calendar September AugustOctober NovemberMaintenance Schedule Throttle Cable Adjustment Mower MaintenanceCarburettor Adjustments EngineAir Cleaner Service Oil ServiceKeeping Engine Clean Spark Plug ServiceClutch Cable Adjustment Deck HousingSecuring Nuts & Bolts Cutterblade Removal LubricationCutterblade Sharpening Cutterblade AssemblyStorage 14hrs Ventilated area Battery chargingProblem Possible Fault Remedy Trouble ShootingTrouble Shooting EC Declaration of Conformity Declaration of ConformityItem no Description QTY Item Note Parts ListNut M6 Nyloc Insert 09438 Washer Spring M6 09474 Item no Parts List Serial No Customer Information /NOTES

3401, 341A specifications

Hayter Mowers is known for its commitment to quality, innovation, and user-friendly designs, and the Hayter 341A and 3401 models exemplify these principles. Both of these mowers are designed for residential use and cater to homeowners who value efficiency and precision in lawn care.

The Hayter 341A is equipped with a powerful 125cc OHV engine that delivers reliable performance, ensuring that users can tackle their mowing tasks quickly and effectively. Its lightweight design allows for easy maneuverability, making it suitable for small to medium-sized gardens. The 341A features a 41 cm steel cutting deck, providing durability while achieving a fine finish on grass. One of the standout features of the 341A is its 4-in-1 capability, allowing users to choose between collecting, mulching, rear discharge, or side discharge options, giving them the flexibility to maintain their lawns according to their preferences and conditions.

In contrast, the Hayter 3401 model appeals to a slightly different user base with its enhanced features. The 3401 boasts a powerful 150cc engine, offering increased torque and cutting power, making it ideal for larger lawns and tougher grass conditions. It features a wider 48 cm cutting deck, enabling faster mowing and better coverage with each pass. This model also includes an advanced variable speed system, allowing operators to adjust the mowing speed according to their comfort and the terrain they are navigating.

Both models incorporate innovative technologies designed to improve the user experience. For instance, they come with an adjustable cutting height feature, allowing for precise control over grass length, which is especially useful during different seasons. The ergonomic handle design reduces strain during extended use, ensuring that lawn care remains a comfortable task even over longer periods.

Durability is a hallmark of Hayter products, and both the 341A and 3401 are built with high-quality materials designed to withstand the rigors of regular use. The mowers also have robust grass collection systems, minimizing the need for raking post-mow and making cleanup efficient.

In summary, the Hayter Mowers 341A and 3401 combine powerful engines, versatile cutting options, and user-friendly features. These models reflect Hayter's commitment to enhancing lawn maintenance, providing homeowners with the tools they need to achieve a pristine lawn with ease and efficiency.
Top Page Image Contents