Hayter Mowers 111-2842 Rev B Recommended Maintenance Schedules, Premaintenance Procedures

Page 17

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

After the first 5 hours

Change the engine oil.

 

 

 

 

Check the engine oil level.

Before each use or daily

Ensure that the engine stops within 3 seconds after releasing the engine stop lever.

 

Clean grass clippings and dirt from under the mower.

Every 25 hours

Replace the air filter; replace it more frequently in dusty operating conditions.

 

 

 

Before storage

Empty the fuel tank before repairs as directed and before annual storage.

 

 

 

 

Lubricate the wheel gears.

 

Lubricate the upper handle.

 

Change the engine oil.

Yearly

Replace the cutterblade or have it sharpened (more frequently if the edge dulls

 

 

quickly).

 

Refer to your Engine Operator’s Manual for any additional yearly maintenance

 

 

procedures.

 

 

 

Yearly or before storage

Charge the battery monthly (or as needed) and before storage.

 

 

 

Important: Refer to your Engine Operator’s Manual for additional maintenance procedures.

Premaintenance

Procedures

Preparing for Maintenance

1.Stop the engine and wait for all moving parts to stop.

2.Disconnect the spark plug lead from the spark plug (Figure 39) before performing any maintenance procedure.

Important: Before tipping the mower to change the oil or replace the cutterblade, allow the fuel tank to run dry through normal usage. If you must tip the mower prior to running out of fuel, use a hand fuel pump to remove the fuel. Always tip the mower onto its side with the air filter up.

Tipping the mower may cause the fuel to leak. Petrol is flammable, explosive and can cause personal injury.

Run the engine dry or remove the Petrol with a hand pump; never siphon.

Figure 39

3.After performing the maintenance procedure(s), connect the spark plug lead to the spark plug.

17

Image 17
Contents With Auto-drive, ES, and VS R53S and R53A Recycling MowerIntroduction Safety ContentsPreparation Maintenance and StorageStarting OperationSafety and Instructional Decals Sound PowerSound Pressure Vibration, Hand/arm108-7450 Installing the Fuse SetupUnfolding the Handle Filling the Engine with OilImportant Use only the charger supplied with the mower Charging the BatteryInstall the Mulch Plug or Grass Bag Filling the Fuel Tank Product Overview OperationChecking the Engine Oil Level Adjusting the Cutting HeightAdjusting the Upper Handle Height Starting the Engine Mulching the Clippings Traveling ForwardStopping the Engine Removing the Grass Bag Installing the Grass Bag Collecting Grass Side-discharge Installing the Side Discharge ChuteRemoving the Side Discharge Chute Operating TipsCutting Grass Cutting LeavesRecommended Maintenance Schedules MaintenancePremaintenance Procedures Preparing for MaintenanceLubricating the Upper Handle LubricationLubricating the Wheel Gears Changing the Engine Oil Engine MaintenanceReplacing the Air Filter Replacing the Fuse Electrical System MaintenanceAdjusting the Auto-drive Drive System MaintenanceReplacing the Cutterblade Blade MaintenanceCleaning the Mower CleaningStorage Preparing the Mower for StorageRemoving the Mower from Storage Folding the HandleUpright Position Forward Position1st Year 12 months Page Limited Warranty Date of Sale Your Local Dealer