Hunter Fan 23923 installation manual For Standard or Angle mounting

Page 6

3 • Assemblage et suspension du ventilateur

3 • Assembling and Hanging the Fan

WARNING: Fan may fall if not assembled as directed in these installation instructions.

3-1. Unbundle the wires from the fan.

3-2. Remove the shipping spacer from the top of the motor housing.

For Standard or Angle mounting:

3-3. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan through the downrod.

3-4. Loosen the square head set screw on the adapter to install the pipe and ball assembly. Note: When the pipe and ball assembly is fully installed, 2-3 threads on the pipe will still be visible; this is normal. Securely retighten the set screw with a wrench or pliers.

CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from

unscrewing. Once assembled, do not remove the downrod.

3-5. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim.

Steps 3-23-3

Downrod

Canopy

Set Screw

Step 3-4

U-shaped

Hole

6

42773-01 • 06/18/09 • Hunter Fan Company

Image 6
Contents Type 5 Models Welcome Installer’s Choice and Optional Accessories Installing Multiple Fans? Getting ReadyInstalling the Ceiling Plate For Standard or Angle mounting Wiring the Fan Dual Switch WiringSingle Switch Wiring Installing the Canopy Assembling the Blades Completing Your Installation With a Bowl Light Fixture Attaching the Upper Switch Housing Installing the Glass Bowl Operating and Cleaning Your Ceiling Fan To Change Airflow DirectionProblem Noisy operation TroubleshootingProblem Nothing happens fan does not move Problem Excessive wobbling