7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-13. First install B10 candelabra bulbs (60
Watt Maximum) into the sockets.
7-14. Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-15. Thread the pull chains through the holes in the metal disc. Then, thread the pull chains through the hole in the center of the glass bowl.
7-16. Thread the pull chains through the
grommet holes in the cover plate.
7-17. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-18. Screw the finial onto the threaded rod end until tight.
Breakaway
Connector
Light Bulbs (B10 Candelabra Base 60 Watt Maximum)
Metal Disc
Threaded
Rod
Glass Bowl
Cover Plate
Grommet Hole
Finial
Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation.
12
42773-01 • 12/17/07 • Hunter Fan Company
